Product Description:
This equipment has excellent manufacture,complete
collocation,simple operation.It is consist of extracting
tank,concentrated pot,storage tank for liquid
material,condenser,oil-water separator, filter, delivery
pump,vacuum pump and so on.
We also have steam heating and electric heating,the user can
operate it only to engage the steam or electricty.
And the whole system could run in low temperature to reduce cost
and time of dewaing
Equipment descriptions- herb extraction machine
1) After being preheated, the raw material liquid enters into the
heating tube through the bottom of the evaporator. The heating
steam carries out condensation out side the pipe. After the raw
material is heated, it is boiled and vaporized.
2) The secondary produced will rise at a high speed in the tube and
drive the material liquid to flow upwards along the interior wall
of the tube in the form of rise and carry out continuous
evaporation and vaporization with accelerated now.
3) The gas-liquid mixture will be separated after they enter into
the separator. The completed liquid after concentration will be
discharged from the bottom of the separator. This evaporator needs
elaborate design and operation.
That is, the secondary steam in the heating tube shall have higher
speed and higher transfer coefficient to make the liquid reach the
preset concentration requirement when it passes through the heating
tube only once.
4) Generally, under the normal pressure, the speed at the outlet at
the top of the tube shall be kept about 20~50m/s, and during the
relief operation, the speed can reach 100~160m/s.
Main Technical Data:
| No. | Item | Material | No. | Item |
| 1 | Extracting Tank | SUS304 | 9 | Vacuum Buff Tank |
| 2 | Warming Jacket | SUS304 | 10 | Warming Jacket |
| 3 | Polyaminocarboxylic Foam Material | SUS304 | 11 | Evaporator |
| 4 | Oil and water separator | SUS304 | 12 | Controlling Cabinet |
| 5 | De-bubble Device | SUS304 | 13 | Valves and viewing glass |
| 6 | Condenser | SUS304 | 14 | Connection Pipes |
| 7 | Medium Tank | SUS304 | 15 | Vacuum Transition Tank |
| 8 | Vacuum Transformer | SUS304 | 16 | Auto Directional Valve |
| 9 | Vacuum Pump | SUS304 | 3 | Steam boiler | |
| 2 | Air Compressor | | 4 | Operation Flat Port | |
Hempseed oil
The appearance and characteristics are very close to the low iodine
value of linseed oil, but slightly greenish.
The approximate fatty acid composition is: 10.1% saturated acid,
16% oleic acid, 46% linoleic acid, and 28% linolenic acid.
The acid value is 3 mg KOH/g, the iodine value is 149-167, and the
relative density is 0.925-0.933 (15/15 ° C). The freezing point is
about 16 °C.
The main ingredients are glycerides of linoleic acid, linolenic
acid and oleic acid.
Used in industries such as paints and soaps.
Mechanical Detail
