Soundproof Operable Wall in Banquet Hall Wooden Sound Insulation
Movable Partition Walls
Movable partition walls melamine finish
The movable partition walls series is the most popular
specification range of fully operational single-panel sliding
partition systems. The noise reduction of up to 50dB noise is
achieved with a combination of operable top and bottom seals, high
performance multiple sound absorbing material in partition walls
and panel assembly design which allows noise reduction between the
frame and the outer layer.
The vertical channel of each movable partition walls panel contains
a polymer insert that is acoustic sealed when the panels are placed
as a wall. The sound insulation partition walls are available in
three thicknesses, 65mm, 80mm and 100mm, depending on the acoustic
rating (from 30dB to 50dB).
Application
Movable partition wall is usually used where indoor space needs to
be fully utilized. Hotels, convention centers, educational
institutions, offices, training areas, etc. can all benefit from
the flexibility of partition wall sound insulation system.
Movable partition walls technical details
| Height (maximum height) | 2000 - 4000 mm |
| Width | 650 - 1200 mm |
| Thickness | 65 mm |
| Left and right telescoping | 140 mm |
| Stretching up and down | 22.5 mm |
| Push and pull force | 30 N |
| Orbital load | 380 kg/m |
| Sound insulation coefficient | 45 DB |
| Panel material | MDF |
Movable partition walls operation
When the operable seal is retracted, the movable partition walls
panel slide easily along a unique aluminum overhead rail system (no
floor rails are required). The telescopic end panel allows the
walls to be locked off to complete the acoustic seal. The rail and
carrier systems make sure movable partition wall is easy to operate
and change direction, allowing panel stacking in countless
configurations.
For aesthetic appeal, it is possible to provide almost any
decorative finish, including veneer, laminates, walls, carpets,
whiteboards and decorative lacquers.
Movable partition walls features
Many panel stack options are completely flexible.
No floor track to get in the way.
Individual movable partition wall panel can be stored to maximize
the use of space.
Operable top and bottom seals for easy operation.
A wide range of surface finishes are available for movable
partition walls.
High performance multiple fill for maximum noise reduction.
Sound insulation aluminum frame structure, enhance the acoustic
effect.
Unique track systems ensure quiet and easy operation.
Three panel thickness are available for a variety of acoustic
requirements.
