Rockfall steel wire netting hexagonal Gabion wire mesh for slope
protection
Product Description:
Rock fall Steel Wire Netting are factory manufactured rolls made up
of mechanically double twisted hexagonal wire mesh using Heavily
Galvanized steel wire. Mechanically woven double twisted meshes are
non raveling and the edges of the mesh are reinforced with a
thicker wire called the selvedge/edge wire. These nets are used to
prevent small size boulders or rocks from falling in road ways, the
mine, the water and electricity project, the tourist site, the
river course and in the municipal engineering, thus minimizing loss
of property or life. In case of applications in marine or highly
corrosive environment, an additional protection is provided by
extruding 0.5mm thick PVC coating over the heavily galvanized wire.
The main advantages over other types of mesh are the features of
flexibility, non-raveling design, superior corrosion resistance and
unique mechanical characters
Benefits and features -
Reduce run off.
Consistent quality and performance.
Retain more water than hydro mulch covers.
Reduce sediment concentration and soil loss.
Excellent performance in strength and durable under high
velocities.
Vegetation performs better with blankets than with hydro mulches.
Ease of installation.
Applications -
Gabions for Slope protection - Erosion control blankets are used to
prevent surface erosion and accelerate the establishment of
vegetation. Typically, blankets are intended for the following
applications:
Slope protection
Channel and ditch linings
Reservoir embankments and spillways
Culvert inlets and outfalls
Dikes, levees and riverbanks
Erosion control blankets provide a mechanically stabilized form of
immediate cover, functioning as a barrier against both the
detachment and transportation phase of erosion process until
vegetation or reinforced vegetation assume this:
| HEXAGONAL WIRE MESH IN ROLLS (ROCK-FALL NETTING) |
|---|
WIRE DIAMETER
(mm) | HOLE SIZE
(mm) | LENGTH OF ROLL
(m) | WIDTH OF ROLL
(m) | WEIGHT
(kg/m) |
| 3.00 | 80 x 100 | 20 | 0.50 – 1.00 – 1.50 – 2.00
2.50 – 3.00 - 3.50 – 4.00 | 1,75 |
| 2.7 | 100 x 120 | 20 | 0.50 – 1.00 – 1.50 – 2.00
2.50 – 3.00 - 3.50 – 4.00 | 1.50 |
Other specification and surface treatment are also available.
All of aour gabion products can be made according to ASTM 975
standard or EN 10223 standard.
