crusher Lubricate the bearing regularly Knife Crusher HDPE Recycling Machine for plastic crusher
Applicable to the crushing and reuse of various plastics,
especially for all types of rigid plastics (such as material heads,
shoes, etc.).
Crusher blade
The crusher is easy to operate, the tool change is simple and
convenient, and the tool holder is optimized. The claw cutter can
disperse the force and make the shear force of each knife increase.
It is suitable for crushing thick materials, hard material blocks,
material heads, etc. The tool cutting force is improved and the
tool wear is reduced. The electronically controlled safety design
is provided. The hopper adopts a double-layer structure and is
filled with sound-insulating material, so that the equipment has
good safety and environmental protection, and is power-saving and
durable. 1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement,
durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system
to ensure safe use.
6, can choose different tools and different holes through the
screen.
Knife Crusher
Slice knife structure is between claw knife and flat knife and is
suitable for crushing plastic products and outlet materials such as
ordinary sheets, pipes, profiles, plates and packaging materials.
General-purpose plastic crusher uses sealed bearings to keep the
bearings rotating for a long time; the knife type is designed
reasonably and the product is evenly granulated; the knife block is
heat-treated and the exterior design is elegant and generous.
1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement,
durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system
to ensure safe use.
6, can choose different tools and different holes through the
screen
Flat knife crusher
Flat crushers are suitable for the recycling of plastics like
boxes, thin tubes, blow molded parts, bottles and shells. The
crusher is easy to operate, and the tool change is simple and
quick. The flat cutter has a large structure and is suitable for
crushing large-volume thin-walled and thin material products to
improve the crushing efficiency. The electronically controlled
safety design is adopted. The hopper adopts a double-layer
structure and is filled with sound insulation materials. Attached
with an overload protection device, power chain protection system,
making the device has a good security and environmental protection,
saving power and durable.
1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement,
durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system
to ensure safe use.
6, small machine with a pulley, easy to move, the main machine will
have a water-cooled system to facilitate the time action.
7, can choose different tools and different holes through the
screen.
Maintenance for crusher
1. The plastic crusher should be placed in a ventilated position to
ensure that the motor working heat is dissipated and its life is
extended.
2. Lubricate the bearing regularly to ensure the lubrication
between the bearings.
3. Check the tool screws regularly. After using the new plastic
crusher for 1 hour, tighten the movable knife with the tool and fix
the screws of the knife to enhance the fixing between the blade and
the knife holder.
4. In order to ensure the sharpness of the tool incision, the tool
should be inspected to ensure its sharpness and reduce unnecessary
damage to other components caused by the blunt blade.
5, when changing tools, the gap between the moving knife and the
fixed knife: 20HP more than the best 0.8MM crusher, 20HP following
0.5MM better than the crusher. The thinner the recycled material,
the larger the gap can be.
6. Before the second start, the remaining scraps in the machine
room should be cleared to reduce the starting resistance. The
inertial cover and pulley cover should be opened periodically to
remove the ash outlet below the flange. The plastic crusher chamber
discharges the powder into the shaft bearing.
7. The machine should be well grounded.
8. Regularly check whether the plastic crusher belt is loose and
tighten it in time.
| Model | PC-400 | PC-500 | PC-600 | PC-800 | PC-1000 |
| Crusher Room(mm) | 270*410 | 300*500 | 320*600 | 450*805 | 650*1020 |
| Fixed Knife (pcs) | 2 | 2 | 2 | 4 | 4 |
| Rotary Knife(pcs) | 12 | 15 | 18 | 24 | 30 |
| Main Motor(kw) | 7.5 | 11 | 15 | 22 | 45 |
| Diameter of motor (mm) | Φ236 | Φ296 | Φ296 | Φ400 | Φ680 |
| Weight(kg) | 470 | 720 | 890 | 1800 | 3500 |
| Dimensions(mm) | 1200*850*1320 | 1500*1000*1400 | 1550*1100*1650 | 2000*1500*2200 | 2800*1850*2800 |
| Capacity(kg/h) | 200-400 | 400-600 | 500-800 | 800-1000 | 1000-1300 |
