| general characteristic |
| Sensing range | 80 ... 2000 mm |
| adjustment range | 120 ... 2000 mm |
| blind | 0 ... 80 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 180 kHz |
| latency | Min 65ms
factory seting 195ms |
| Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output
function setting |
| electrical specification |
| working voltage | 10 ... 30 V DC , ripple 10 %SS |
| Power Consumption | ≤ 900 mW |
| connector |
| Type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
| input |
| synchronization | two-way
0-level -UB...+1 V
1-level: +4 V...+UB
input impedance : > 12 KOhm
synchronization pulse : ≥ 100 µs, clock cycle : ≥ 2 ms |
| Normal operating mode | max. 30 Hz |
| Multi-mode | ≤ 30 Hz / n , n = number of sensors , n ≤ 5 |
| output |
| type | 1way Current output 4...20mA
1way voltage output 0...10V |
| latency | < 150 ms |
| resolution ratio | evaluation range [mm]/4000, but ≥ 0.35 mm |
| Characteristic curve deviation | ≤ 0.2 % of full-scale value |
| repeated accuracy | ≤ 0.1 % of full-scale value |
| load impedance | current output: ≤ 500 Ohm
Voltage output: ≥ 1000 Ohm |
| temperature drift | ≤ 2 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation) |
| Licensing and Certification |
| UL Certification | cULus Listed, general requirements |
| CSA Certification | cCSAus Listed, General Purpose |
| CCC Certification | The maximum operating voltage of 36 volts products, without going
through the license certification, and there is no need to identify
with CCC-. |
| surrounding |
| ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| mechanical characteristics |
| Wiring type | Connector M12 x 1 , 5-pin |
| protection | IP65 |
case | SS 1.4305
PLANSTIC PART PBT |
transducer | Epoxy resin / hollow glass sphere mixture; polyurethane foam |
| weight | 170 g |
