INTRODUCTION
High quality carbon structural steel is carbon steel with carbon
content less than 0.8%. It contains less sulfur, phosphorus and
non-metallic inclusions than carbon structural steel, and its
mechanical properties are better. This kind of steel has a large
output and a wide range of uses. Generally, it is rolled (forged)
into round, square and flat sections, plates and seamless steel
pipes. It is mainly used to manufacture parts and components of
general structure and mechanical structure, as well as building
structural parts and pipelines for conveying fluids. According to
the use requirements, sometimes heat treatment (normalizing or
tempering) is needed after use.
AISI 1010 carbon steel is a plain carbon steel with 0.10% carbon
content. This steel has relatively low strength but it can be
quenched and tempered to increase strength.
SUPPLY RANGE OF of AISI 1010
-Dimension: Diameter 4-1600 mm, any length below 16 meters
-Delivery Conditions:
Cold drawn: 4-100 mm
Peeled: 30-160 mm
Grinded: 4- 600 mm
Turned: 130-1200 mm
Hot rolled: 12-320 mm
Hot forged: 130-1600 mm
-EAF+(ESR) or EAF+LF+VD+(ESR)
-HOT rolled; Cold rolled; Forged; Cold Drawn
-Heat Treatment: Untreated, Annealing, N+T, Q+T
-Smelting: EAF+LF+VD (+ESR)
-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request
-UT 100% passed
-Cutting service provided
-Third Party inspection is acceptable (SGS, BV etc.)
Standard
ASTM A213; ASTM A335; ASTM A519; ASTM A106; ASTM A29; JIS G3462; JIS G3458; JIS G3444; JIS G4053; DIN17175; DIN1629; DIN2391; GB/9948, GB/6479; GB/T8162; GB/T8163; GB/T 3077; EN 10297; EN 10084; EN 10083; ISO 683/11; IOS 683/10; IOS 683/1; etc.
Equivalent grades of steel AISI 1010
| ASTM A29/M | Germany
DIN,WNr | JIS G4051 | China
GB | Inter
ISO |
| 1010 | C10 / CK10 | S10C | 10 | C10 |
Chemical Requirements, Composition, %
| Element | ASTM A29
1010 | EN 10084
C10E 1.11221 | JIS G4051
S10C | ISO 683/18 C10 |
| Carbon | 0.08–0.13 | 0.07-0.13 | 0.08-0.13 | 0.07-0.13 |
| Manganese | 0.30–0.60 | 0.30-0.60 | 0.30-0.60 | 0.30-0.60 |
| Phosphorus | 0.040 max | 0.035 max | 0.030 max | 0.035 max |
| Sulfur | 0.050 max | 0.035 max | 0.035 max | 0.035 max |
| Silicon | No Requirement | 0.40 max | 0.15-0.35 | 0.15-0.40 |
Mechanical properties
| Standard | Steel Grade | Yield strength MPa (>=) | Tensile strength MPa (>=) | Elongation % (>=) | Reduction of area % (>=) | Hardness Rockwell B |
| ASTM A29 | 1010 | 305 | 365 | 20 | 40 | 60 |
Quality Assurance
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
PROCESSING
The machinability of AISI 1010 carbon steel, especially in the cold
drawn or cold worked state, is considered as fairly good.
Forming
AISI 1010 carbon steel has good formability and ductility, and can
be easily formed using conventional methods.
Welding
AISI 1010 carbon steel can be welded using all the conventional
welding techniques.
Heat treatment
AISI 1010 carbon steel is mostly used in the annealed or case
hardened condition. However, it can also be heat treated, quenched
and tempered but the cost for performing these processes are very
high.
Forging
Forging can be performed on AISI 1010 carbon steel between 1260 and
982°C (2300 and 1800°F).
Hot Working
The hot working capacity of AISI 1010 carbon steel is between the
ranges of 482 to 93°C (900 to 200°F).
Cold Working
The cold working capacity of AISI 1010 carbon steel is good. In
cases where severe cold working is performed stress relief or full
anneal has to be performed.
Annealing
A full anneal process can be performed for AISI 1010 carbon steel
at 871 to 982°C (1600 to 1800°F), which is followed by slow cooling
process in the furnace. A stress relief anneal process can also be
done at 538°C (1000°F) and then gradually cooled. AISI 1010 carbon
steel in the full annealed condition has a tensile strength of
about 45 ksi.
Tempering
Tempering can be performed on AISI 1010 carbon steel, after
hardening process is completed, at 316 to 593°C (600 to 1100°F).
This depends upon the strength level that is required. When
tempering is performed at 538°C (1000 F), the tensile strength will
be about 75 ksi.
Hardening
AISI 1010 carbon steel can be hardened by both cold working and
heat treatment.
What we can offer?
-We offer a wide range of steel products in a wide variety of
dimensions and executions, according to the common international
specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Shape Available
- Solid round bar
- Flat bar
- Square bar
- Hexagon bar
- Block
- Plate
- Sheet
- Wire rod
- Strip
Our Advantages
- High mechanical property and quenching, enable the surface share
equal hardness after deal with it
- Good polishing and low roughness
- Making the heat-treatment to harden condition before using it
- Competitive price
- Fast production lead-time
- All the material are inspected with 3 times to meet the highly
standards
- Pure steel quality & stable quality to be guarantee
OUR MAIN PRODUCTS ARE LISTED AS BELOW
Notes:
Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized
items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk
orders, by airfreight or express for samples
COMPANY INFORMATION
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china
and serve the global engineering steel market. Our company has more
than 15 years of experience in steel researching, production,
managing and sales. And our team mostly are based on and worked in
national famous steel enterprise.
In the aspect of resources and information, we have established
cooperative and stronger relationship with nearly hundred
enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business
relationship with dozens of steel company, Sharing and holding
equities with several steel enterprises. Because of the close
cooperation with steel companies and our pioneering spirit, which
can ensure us stay at the top competition, and ensure our customers
get what they really want!
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and
trading company. We specialized in special steel which include
alloy structural steel and carbon steel and stainless steel, etc.
All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party,
such as TUV, CE, if you need. Secondly, we have a complete set of
inspection system and every process is checked by QC. Quality is
the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our
warehouse. If the material doesn't have stock, the delivery lead
time is about 5-30 days after receiving your prepayment or firm
order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you
come to China and arrange our driver to our airport to pick you up
when you come.
CONTACT US
We are happy to answer your questions and make you an offer for
these and other materials. Contact us now for more information.
Your Contact Person
Ms Chilli Ho
Phone/Wechat/Whatsapp +86-181-0187-5575
Skype: chilli.ho@outlook.com
Email: chilli.ho@shunitesteel.com
