Once the sliding partition walls panel is positioned, they are
sealed in place with retractable pressure seals.
Telescopic sleeve panel.
Final closure of the sliding partition wall is achieved by
extending a telescopic sleeve on the last panel. The sweep strip
simultaneously extends the top and bottom. The rubber sealing strip
on the side edge of telescopic panelcan seal the sliding partition
wall tightly to reach acoustic integrity.
Sliding partition walls details
How to select the suitable sliding partition walls for your site?
We have 4 types of sliding partition walls,65type,80type,100type
and 125 ultra-high type. You can choose the right sliding partition
walls upon the Height and Soundproof requirement as following.
BG65-- Max height 3.5m, soundproof: 38dB to 43dB
BG85--Max height:5.5m,Soundproof: 43dB to 53dB
BG100--Max height:7m,Soundproof: 43dB to 58dB
Ultra-height Type---Max height:17m,Soundproof: 38dB to 48dB
What you should do on site?
A beam(truss) should built on site for track installation.The min
distance leaving for track installation from false ceiling to top
ceiling is 200mm.
How to install?
We will provide the installation manual and video guiding the
installation job. We can also dispatch the installation engineer
supervising the installation as request.
What is lead time?
The lead time is 7 days to 10 days.
How to transport?
Sea transport is a common mode of transportation. In an emergency,
can be air freight.
How do the goods packing?
Corrugating paper packaging, MDF batten cover all around corner.
The sliding partition walls panel and track, fittings will be
packed separately.
What is Procurement procedure?
Firstly, send us the shop drawings(if the shop drawings is not
available, you can tell us the height from false ceiling to
finished floor and width from wall to wall).
Secondly, we offer you the sliding partition walls layout drawings
for your confirmation.
Thirdly, we quote the sliding partition walls in accordance with
confirmed drawings.
What is finishing face?
The bottom panel is MDF or plywood, which is unfinished face. You
can do decoration on site, such as wallpaper, paint, etc.
We can also provide the product with finished face, such as faux
wood, Woven fabric and Leather.
Sliding partition walls technical details
Panel Suspension | Top hunge system without the need for a floor track. |
Panel Width | Each panel 600mm-1200mm. |
Track | Aluminum OR Steel Track |
Roller on panel | Single or Double Roller |
Panel Frames | Heavy-duty steel-gusseted aluminum inner frames reinforced with
full height. |
Top&bottm seals | Top and bottom pressure retractable seals ensure effortless moved
and locked. |
Module | 700mm - 1200mm maximum. |
Panel stacking | Numerous panel stacking options for complete flexibility. |
Panel face | MDF,Plywood, woven fabric, Leather,Natural wood veneer,
Melamine,Wood moldings, etc. |
Finishes | Satin anodised or polyester powder coating to all exposed aluminium
components available in a wide range of colours as standard. |
