316L 316 Duplex Conical Sintered Filter Element Used In Powder
Transport
JUMAO sintered conical filter element can be used for softening,
desalination, water filtration and water pre-treatment systems, as
well as less-demanding industrial water supply and oil fine
filtration equipment. They are primarily used to provide a
filtering layer that removes solids suspended in water, oil and
adhesive resin.
The sintered conical filter element has a higher-pressure
differential across them than other kinds of filters. The load is
also distributed unequally, since the flow is directed to the
central portion of the filter.
Nonetheless, the low open areas make these conical filter elements
very popular for all kinds of industrial applications - as does the
simplicity of design.
Specification of sintered conical filter element:
| Standard material | 304 stainless steel, 316 stainless steel, carbon steel, other
material is available |
| Standard perforation | 1/8" diameter holes on 3/16" centers |
| Standard mesh liners/covers | 10 mesh, 20 mesh, 30 mesh, 40 mesh, 60 mesh, 80 mesh, 100 mesh.
For mesh lined strainers, flow direction must be specified |
| Handle size | 1" wide × 4" length |
| Flange thickness | 11 gauge |
| End connection | Water flat faced, raised face, ring joint flanges |
| Open area | the available range in open area of strainer to cross section of
pipe is 100% to 300% |
Main purpose of sintered conical filter element:
1) Used as dispersion & cooling material in high-temperature
environments;
2) Used as gas distribution, liquid fluidized bed plate material;
3) Used as high precision, high reliability and high temperature
filter material;
4) Used as high-pressure backwash oil filter.
Example:
1) Precision filtration in a variety of hydraulic oil, lubricants
in the machinery industry;
2) Filtration and Purification in a variety of polymer melts in the
fiber film industry; various high temperature and corrosive liquid
filtration in petrochemical and chemical industry; filtering,
washing and drying of materials in the pharmaceutical industry ;
3) Gas homogenization application in the powder industry ;
Fluidized plate in the steel industry;
4) The explosion-proof electric apparatus and so on.
