1" Inch Angle Seat Pneumatic Pulse Valve For Dedusting System
SCG353A044
Our factory specializes in the production of various pulse valves
and accessories (diaphragm, coil, pilot head, spring, etc.), this
pulse valve is made of copper coil, stainless steel plate
diaphragm, high quality pilot head, aluminum alloy valve body. Good
durability and corrosion resistance, and we can provide AC110V,
AC220V, DC12V, DC24V voltage for your choice.we provide a certain
guarantee for the quality of the product.
The solenoid valve consists of two basic functional units: an
electromagnetic coil and a magnetic core. A valve body containing
one or several holes. When the electric coil is energized or
de-energized, operation of the core will cause fluid to pass
through the valve body or be severed. The solenoid is mounted
directly on the valve body and the core is enclosed in a sealed
tube to form a compact, compact combination.
Specification of SCG353A044 Pulse Jet Valve
Working Pressure 0.3~0.8Mpa
Ambient Temperature -5~50'C
Relatively Humidity <85%
Working Medium Clean Air
Voltage AC110V / AC220V / DC24V
Diaphragm life cycles Over 1000k Cycles
Production Class IP65
Spring 321 Stainless Steel
Diaphragm NBR or VITON
Body Material Aluminum-alloy Die Casting
Size of the Pulse Valve
| Type | Port Size | Orifice(mm) | Kv/Cv | Pressure |
| M3/h | I/min | Mix | Max |
| SCG353A043 | 3/4" | 25 | 14 | 233 | 0.3 | 8.5 |
| SCG353A044 | 1" | 25 | 23 | 283 | 0.3 | 8.5 |
| SCG353A047 | 1 1/2" | 52 | 46 | 768 | 0.35 | 8.5 |
| SCG353A050 | 2" | 66 | 77 | 1290 | 0.35 | 8.5 |
| SCG353A051 | 2 1/2" | 66 | 92 | 1540 | 0.35 | 8.5 |
| SCG353B060 | 3" | 75 | 170 | 2833 | 1 | 6 |
Dimension Drawing of Pulse Valve
| Ordering Code | A | B | C | D | E | F | G | H | J | K | Weight |
| SCG353A043 | 75 | 45 | 27 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0.7 |
| SCG353A044 | 75 | 45 | 27 | 51 | 168 | 75 | 39 | 92 | 113 | 130 | 0.65 |
Other Size of Pulse and Armature
Professional Factory
Selection principle
safety
1. Corrosive medium: Plastic King solenoid valve and all stainless
steel should be used; for strong corrosive medium, isolation
diaphragm type must be used. Neutral medium, it is also advisable
to use copper alloy as the solenoid valve of the valve shell
material. Otherwise, the rust will often fall off in the valve
shell, especially in occasions with infrequent movement. Ammonia
valves cannot be made of copper.
2. Explosive environment: The corresponding explosion-proof grade
products must be selected. For outdoor installation or dusty
occasions, waterproof and dustproof varieties should be used.
3. The nominal pressure of the solenoid valve should exceed the
maximum working pressure in the pipe.
reliability
1. Working life, this item is not included in the factory test
project and belongs to the type test project. In order to ensure
the quality, we should choose the famous brand products of regular
manufacturers.
2. Work system: divided into long-term work system, repeated
short-time work system and short-term work system. For long-time
valve opening only when the time is closed, the normally open
solenoid valve should be used.
3. Working frequency: When the operating frequency is high, the
structure should be a direct-acting solenoid valve, and the power
supply should be preferably AC.
Economic
Economics is not only the price of the product, but also the cost
and quality of the product, as well as the cost of installing
repairs and other accessories.
More importantly, the cost of a solenoid valve in the entire
automatic control system in the entire automatic control system and
even in the production line is negligible. If the coupry is small
and cheap, the damage caused by the wrong group is huge.
please care the products details at our website, any confuse please
contact us or Note your request online. Big quantity purchase
,please contact our online service to ask more economic shipping
way or discuss the more pretty price.
Welcome our inquiry!
