Normal Close 2" Inch Alloy Integral Pilot Solenoid Pulse Jet Valve
SCG353A050
The 353 series is a two-position normally closed, internal pilot
type two-stage pulse diaphragm valve. The valve body is made of
aluminum and has a threaded connection port.,The pipe connection
must match the parameters indicated on the product nameplate.
Note
Reducing the diameter of the pipe may cause the solenoid valve to
malfunction or malfunction.
To protect the solenoid valve, install the appropriate strainer or
filter as close as possible to the inlet end.
Used for bag house dust collector
Working pressure:0.4~0.6MPa
Working medium: Compressed clean air
Voltage:DC24V, AC24V, AC110V, AC220V/50HZ
Temperature:-10°C~55°C
The relative humidity of air not exceeding 85%
Service life of diaphragm:1 million times
Dimension of Pulse Valve
| Type | Port Size | Orifice(mm) | Kv/Cv | Pressure |
| M3/h | I/min | Mix | Max |
| SCG353A047 | 1 1/2" | 52 | 46 | 768 | 0.35 | 8.5 |
| SCG353A050 | 2" | 66 | 77 | 1290 | 0.35 | 8.5 |
| SCG353A051 | 2 1/2" | 66 | 92 | 1540 | 0.35 | 8.5 |
| SCG353B060 | 3" | 75 | 170 | 2833 | 1 | 6 |
Other Size of Pulse Jet Valve
Delivery
Precautions for use
1. If the raw material tape, paste, lubricant is used when it is
fixed. To prevent their particles from entering the system.
2. Use the correct tool and use the installation tool as much as
possible at the connection point.
3. To prevent damage to the solenoid valve, do not over-tighten the
pipe.
4. Do not use the valve body or coil as a lever.
5. The pipe cannot be connected to any force, bend or deformation
after the pipe is connected.
6. If electrical connections are made, they must be performed by
trained personnel and must comply with local regulations and
standards. All electrical screw terminals must be properly secured
to standard before use. Depending on the voltage, electrical
components must be grounded and must comply with local codes and
standards.
7. Perform an electrical test first before applying pressure to the
system. Power on the solenoid valve a few times, pay attention to
whether you can hear the metal click that indicates the normal
operation of the solenoid valve.
8. Most solenoid valves are equipped with coils that allow them to
operate continuously. In order to prevent personal injury or
property damage, please do not touch the solenoid valve because it
will generate heat under normal working conditions. If the solenoid
valve is easily accessible, the installer must provide protection
against accidents caused by contact.
please care the products details at our website, any confuse please
contact us or Note your request online. Big quantity purchase
,please contact our online service to ask more economic shipping
way or discuss the more pretty price.
Welcome our inquiry!
