KSD301 Thermostat applications fields
●Drinking fountains, electric kettle, sandwich toaster,Dishwasher,
dryer, disinfection cabinet, microwave oven,Coffee maker, electric
cooker, refrigerator, air conditioner, laminator and other electric
appliances.
● office equipment
● car seat heaters, car antifreeze device
KSD301 thermostat Specifications
● Electric parameters: 1) CQC, VDE, UL, CUL AC250V 50 ~ 60Hz 5A /
10A / 15A(Resistive load) 2) UL AC125V 50Hz 15A (resistive load)
● Operating temperature range :0-300 ℃ (optional), temperature
accuracy: ± 2 ± 3 ± 5 ± 10 ℃
● response and action temperature difference: 8 ~ 100 ℃ (optional)
● Connection: plug terminal 250 # (0 ~ 90 ° bend optional); plug
terminal 187 # (0 ~ 90 ° bend optional thickness 0.5,0.8 mm
optional)
● Life: ≥ 100,000 times
● Electric Strength: AC 50Hz 1800V lasted 1min, no flicker, no
breakdown
● Contact resistance: ≤ 50mΩ
● Insulation resistance: ≥ 100MΩ
● Contact form: Normally closed: temperature rise, contacts open,
the temperature drops, contact connected;
Normally open type: temperature rise, contact connected, the
temperature drops, the contact opens
● Housing protection: IP00
Installation: KSD301 Series Install the ordinary activities of
ring,Installation activities, a small circle, installation of flat
panel active ring,Common with a large aluminum Mounting holes
cover, extended
aluminum cover with mounting holes.
KSD301 thermostat competitive advantage
● stable
● high precision
● Small size, light weight
● High reliability, long life
● Dry worry about the small radio
● Do not pull the arc
KSD301 thermostat Notes
● Grounding: The thermostat metal cover Connected to grounded metal
parts and equipment.
● temperature using contact-type installation,Should be made to
cover up snapping the metal apparatus was charged with the mounting
surface,To ensure that the temperature effect, the surface
temperature should be coated with thermal grease, or other
properties of similar medium.
●Installation can not be To cover the top surface collapsed,Loose
or deformed,So as not to affect performance.
● Do not allow the liquid to penetrate the internal temperature,Not
to cover the cracks, not free to change the shape of the external
terminals.
● product is not greater than 5A current in the circuit, should be
selected copper cross-section of 0. 5-1 mm 2 wire connection;Not
more than 10A current in the circuit, should be selected
cross-section of 0.75-1.5 mm 2 copper wire connection.
● product should be less than 90% relative humidity, ambient
temperature below 40 ℃ ventilated, clean, dry,Non-corrosive gases
stored in the warehouse.
● use the process can not bend terminals, otherwise it will affect
the reliability of electrical connection
