Wide Use Waste Enameled/Armoured/Electrical Copper Wire Recycling
Machine
The copper cable wire granuating machine separates plastic or
rubber sheath and copper core, followed by cutting, crushing and
separating, to thoroughly separate the copper and plastic so as to
recycle them.
Recycled copper from wires can maintain original quality of copper
by this machine, while the plastic can also be recycled, it can
bring a big economic benefit.
Features of Enamelled copper wire recycling machine:
1. Compact structure, beautiful appearance, reasonable layout, easy
installation;
2. Using PLC control system, intelligent operation, so that
equipment even feed.
3. Crusher with roller crushing system, slow speed, large capacity,
low noise, simple operation.
4. Crushing separation Dust removal equipment in the form of a
combination of flat, easy to move and transport, but also increase
the equipment is not flexible.
5. Equipment separation rate of up to 99.9%.
6. Recycling system can re-grinding semi-finished products to
ensure that metal and non-metallic products completely separated.
7. The dust removal device can control the dust spill, so the dust
removal rate is up to 99%.
Cable Recycling Machine Specifications:
| Model | TF-1200 |
| Recycling capacity | 1000-1200kg/h |
| Processed wire diameter | 1-40mm |
| Total power | 129.36KW |
| Voltage | customized |
| Dimension | 16×10×3m |
| Weight | 12000kg |
Scrap Copper Cable Wire Granulator Working procedure :
When directly put into the machine,used cable is cut into granules
first,during this process,copper and plastic is separated but mixed
together,then the granules are sent to vibration device for
separation,through wind blow and vibration,the copper and plastic
are separated,then pure copper comes out from one side and pure
plastic comes out from the other side,we collect the separated pure
copper and plastic at last.
Cable recycling plant Main Components :
1.First crusher(double shaft crusher)
it needs the operator to put the waste wires into machine. Although
this step must be operated manually, it has the features like easy
to operate and high output.
2.conveyor:
it moves the waste wire from first crusher to second shredder.
3.Second shredder
it is a device which is used for crushing the 2~3cm wire from first
crusher. This machine can crush the foreign body on external
surface and separate the external rubber with copper completely.
Additionally, the filtering network fixed at the bottom of machine
is used for controlling the processing speed and output for
different wires, and it is suitable for processing the cable from
thinner one like hair to thicker one like power cable when it
change the filter network. The pulverizing chamber can be operated
by oil pressure system, what is more, it is easier to repair and
change the blade.
4.Blower
move the crushed materials from second shredder to separator by
wind wave and pressure.
5.Separator
as a core part, it is used to separate the copper and external
rubber, though the structure is complex, it is easy to operate.
6.Dust collector
this device is used for collecting the dust produced in sorter
through blower, there are 12 filtration woven belts whose material
is imported diffusing tissue which can recycle the dust
effectively, and so guarantee the cleanliness of the air of
surrounding environment .
7.PLC controller
as a control device, it is used for adjusting all the machines and
equipped with emergency stop and timing function. The working
principle is using the PLC to control each part of the machine with
strong controllability.
