Vertical Type Automatic High efficiency Motor Stator Recycling
Machine
Automatic Motor Recycling Machine MR-T is used for motor/stator
cutting and stripping copper from iron/aluminum cover, this is a
kind of waste motor/stator recycling equipment. This machine cut
the stator/motor in half firstly, then take all the inside copper
out finally that all steps within 2 times. It's very cost-effective
and convenient in using.
Advantages of Motor recycling machine:
1. This equipment is our self-developed product, which is targeted
with high efficiency, after cut the stator in half, it can take out
all the copper winding within 2 times, which is high economic
efficiency.
2. Nice appearance with reasonable structure.
3. Using heavy cylinder, large torque, can withstand high loads.
4. We use international famous brand for hydraulic solenoid valve
with durable long life.
5. The material of fixture is alloy steel with durable long life.
6. The processing of equipment is without metal loss, with improved
recycling value, and environmental friendly.
Specification of stator recycling machine:
| Product Name | Motor Stator Recycling Machine |
| Usage | Cutting and Pulling Out The Copper From Stator |
| Stator Range | 8~30cm Stator Diameter |
| Capacity: | 8~30 Pieces/Hour |
| Power: | 3-Phase 4KW |
| Net Weight: | 790Kg |
| Mea | 1260mm*710mm*1860mm |
Description of Motor Separating Machine:
The Motor Seaprator havs 2 main parts,one is cutting parts another
is separating(pulling) parts.Using heavy cylinder, large torque,
can withstand high loads. We use international famous brand for
hydraulic solenoid valve with durable long life. The material of
fixture is alloy steel and the blade is made of manganese steel
with durable long life.
cutting area mainly include flate blade can cutting motor shell and
sharp blade can cut motor stator into 2pcs.the blade is made of
manganese steel with durable long life.
FAQ
Q1: Is there anything we should take care before processing?
A1: Please clear up iron from the mixed cables, get the granulator
started, infeed according to the granulator’s capacity.
Q2: If there’s plastic in copper granules,how should I do?
A2: Please adjust the wind power of the vibrator, bottom wind
power, adjust vibration frequency.
Q3: If copper granules output quantity is becoming Less,what’s the
problem?
A3: Please inspect the vibrator, please brush off the copper
granules in the vibrator’s screen.
Q4: Which kinds of cables can I processing with this machine?
A4: Auto-wire, communicate cable, and other mixed copper
wire/cable, phone wires and so on.
Q5: Is there has pollution in recycling?
A5: This is dry separating, not pollution and other waste at all.
Q6: Is there any other kinds cable granulator? I want bigger
output.
A6: Yes, sure, we also have other model BS-800 with bigger output,
and BS-1000, the output can up to 1t to 2t.
