Wide Use Waste Metal Recycling Automatic Steel Scrap Shredder
Machine
This twin shaft shredder is mainly used to crush big solid
materials which are hard to crush by single shaft shredder,such as
tire, wood, big container, aluminum cans, e-waste, plastic sheet,
plastic board, pipe, pallet and so on. Siemens motor is adopted,
the machine is approved by CE with start, stop, reverse functions.
The machine has characteristics of low speed, big torque and low
noise.
Applicable Raw Material of Crushing Machine:
1. A variety of hollow containers: plastic beverage cans, plastic
barrels, iron drums,crates, drums
2. Discarded appliances: TV, washing machines, refrigerator shell
3. Pipe: large pipe, pipe fittings, PE pipe
4. Waste template: wooden tray, plastic tray, forklift pallet
5. Discarded tires: car tires, truck tires
6. Scrap metal: car shell, aluminum alloy, scrap cast aluminum
parts, engine casing,lead and steel plate (thickness <5mm)
7. Food waste, household waste, animal carcasses, RDF derivatives,
medical waste,bio-straw, garden garbage
8. Plastic material, paper mill stranding
Advantage of twin shaft crusher machine:
1. The metal shredding machine is suitable to process very big size
of plastic material, such as plastic pipe, plastic board, wood,
woven bags, tire, aluminum cans, little diameter of copper wire and
pressing plastic film which the single Shaft plastic shredder can
not process, new designed especially for crushing the film in
rolls, hollow barrels and so on.
2. The machine with big feeding mouth, it can put the big plastic
product freely.
3. The rotary blade and cutting blade and blade edge with special
design, it can get very high efficiency and high capacity
4. The copper crushing machine is control by PLC system, . The
knife can rotated in opposite direction, and also can close
automatic if something unexpected happen, with very high safety
service
5. The metal shredder machine running slowly with low noise and low
dust
Specifications of waste metal crushing machine:
| Model | JL-D600 | JL-D800 | JL-D1000 | JL-D1200 |
| Motor power (kw) | 7.5+7.5 | 15+15 | 18.5+18.5 | 30+30 |
| Capacity (kg/h) | 500-600 | 700-800 | 800-1000 | 1000-1200 |
| Cutter (pcs) | 22 | 30 | 30 | 36 |
| Shredding room size (mm) | 600x430 | 800x430 | 1000x500 | 1000x580 |
| Weight (kg) | 2300 | 3300 | 5000 | 6800 |
Working principle of Scrap Metal Crusher:
The basic principle of gear motor driving motor to generate power
to make the shaft extrude. The main principle is putting a
filter-type conveyors at the discharge port, with high speed and
torque motor driven rotor hammer on the host hitting into the
cavity of the substance to be crushed, the space between the liner
and the hammer through the formation of the material to be broken,
which can be crushed into specifications detritus.
