Copper And Aluminum Separator For Scrap Air Conditioner Radiator
TF-16 radiator recycling machine is used for separating the outside
aluminium foil and the inside copper pipe of wasted air
conditioning radiator. Each set of this kind of machine just can
separate two different specification radiators. Because the
interval width of the copper pipe are different in the radiator, so
we need you can offer us the width of the copper pipe of the
radiator. In China, the width of the radiator copper pipe is 21MM,
25MM, and 19MM. Besides, the thickness is one layer and two layers.
Application of Aluminum copper radiator separator:
Automatic Small scrap radiator fin copper tube aluminum strip
cutting separator machine can strip and separate copper from
aluminium in waste air condition radiator, waste water tank
directly, easy to operate
Advantages of Radiator recycling machine:
1.Humanized design, easy to operate.
2. High efficiency, separation within seconds.
3. Labor saving, use automatic recycling instead of labor working.
4. No damage to copper pipes, no copper loss, practical and
economical.
Specifications of radiator separating machine:
| Productivity | 3000-4000Kg/day |
| Dimensions | 1800*850*1100mm (approximate) |
| Weight | 700kg (approximate) |
| Power Supply | 380V / 50Hz / 3 Phase (customized) |
Main structure of radiator separating machine:
1. Compressing part: It is radiator compressing system, the gear
compressor is used for removing aluminum part on the radiator.
2. Radiator input plate: Normally there are 3 parts for radiator
input, and they have different width for different size radiators.
Customer need to put proper size(center distance) radiator on it.
3. Handle: There are totally 6 handles on the machine to adjust
blades inside it.
4. Motor: There are two motors on both sides of the machine.
5. Control panel: There are Start,End and Emergency buttons on the
panel.
6. Blades: Blades used for cutting radiators.
Working principle of scrap radiator separating machine:
1. After starting motor, the v- belt drives the compression roller,
pinch roller, and blade to rotate through the reduction box.
2. The raw material is compact and sent to the fly-cutter blade by
pinch roller.
3. Then, the radiator is cut up by the fly-cutter blade, the copper
pipe is separated, and the
aluminum scattered network is cut up.
4. The machine limited to single,double radiator copper and
aluminum are separated layers
separating copper and aluminum radiators work completed by the
entire unit.
FAQ:
Q:What’s the spare parts of the separator?
A: Spare parts of the separator are blades and belt, we will supply
extra parts according to customers’ requirement.
Q:What’s the warranty time for the equipment?
A: 12 months. During the warranty period, if there is any problem
due to quality,we will supply spare parts for free, and customers
take charge of delivery cost.
Q:What’s ordinary delivery time of the separating machine?
A: Within 12 working days.
