750L Cosmetic Mixer Machine , Hydraulic Lotion Manufacturing
Equipment
Cosmetic Mixer Machine Introduction:
Cosmetic Mixer Machine is consisted of homogenizing emulsifying pot
(lifting cover, tilting pot body), water pot, oil pot, scraper dual
mixing, vacuum system, electric heating or steam heating
temperature control system, electric control, etc. It is the
equipment for top grade medicinal ointment, cream, emulsion.
Cosmetic Mixer Machine Advantages:
-Discharging way
Emulsifier pot cover is lifted up and down through
hydraulic/electric system. The finished products are discharged by
following ways: turn over the pot for discharging, pressurized the
pot to discharge the materials from the bottom outlet with the help
of the delivery pump.
-Temperature Control
Using the electricity heating bar to heat the thermal medium inside
the jacket to heat the material. The heating temperature is
settable and can be controlled automatically. It is also ok to
input steam for heating and input cooling water to the jacket for
cooling the materials down, easy to operate.
-Mixing way
Homogenizer and blade agitator can be used separately or at the
same time. The micronization, emulsifying, mixing, dispersing of
materials can be finished in a short time.
·Capacity:750L
·Material: material contact part SS316L, material non-contact part
SS304.
·Customized service: to provide and design total solution as per
customer URS
Vacuum Emulsifying Machine including:
·Vacuum emulsifying main machine
·Pre-mixing tank for water and oil material
·Vacuum system
·Hydraulic system
·Control system
·Platform made from SS304
Vacuum emulsifying main machine:
·Slow mixer 0-40rpm with PTFE scraper
·Homogenizer 0-3500rpm (rotor and stator can adjust space)
·Heating by steam or electricity
·Pressure: chamber-0.09Mpa to 0.1Mpa, jacket 0.3Mpa for steam
(standard type)
·Upper cover lifting by hydraulic
·Safety limit switch for safety operation
·Upper cover connection: Liquid feed inlet with stainless steel
pipe filter, solid material inlet, vacuum inlet, compressed air
inlet, breaking vacuum inlet, sight glass, CIP cleaning head,
discharging port, dustproof respirator.
Water and oil pre-mixing tank
·High shear mixer 960rpm or slow mixer 60rpm
·Heating by steam or electricity
·Pipeline for material transfer to main emulsifying machine
Vacuum system:
·Water ring type vacuum pump or oil type vacuum pump
·Safety valve for protecting the Water ring type vacuum pump
After finish one batch, customer can choose positive pressure or
rotor pump for material out.
Model
| Capacity | Emulsifying motor | slow mixer motor | Machine dimension | Total power(KW) |
KW | RPM | KW | RPM | LENGTH | WIDTH | HEIGHT | Lifting hight |
| ZRJ-600 | 600L | 7.5 | 1150-3500 | 2.2 | 10-40 | 4000 | 2800 | 2700 | 4200 | 17.6 steam heating |
| ZRJ-750 | 750L | 11 | 1150-3500 | 3.7 | 10-40 | 3800 | 3200 | 3050 | 4400 | 29.3 steam heating |
