Plastic brush Injection Molding Machine Household clothes
Manufacturer for Sale Mould Production Line in China
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory
system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard
are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation
properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts
abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.
Aftersales service: Professional & timely.
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
High efficiency, Energy-saving and high precise proportional
pressure and flow variable displacement pump system make the out of
the hydraulic system matching the required power for entire machine
operation without loss of high pressure throttle and overflow
energy. As comparedwith constant displacement pump, it saves power
by 30%~60%. A motor with same power may be fitted with an oil pump
of bigger displacement and thus accelerates the speed of
machine.Besides, the low oil temperature will prolong the service
life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to
ensure steady mold opening and clamping operation without any
impact.Besides, differential mold clamping operation is fitted to
ensure high production efficiency.
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory
system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard
are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation
properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts
abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.
Aftersales service: Professional & timely.
| SPECIFICATION | HJF-780 |
| A | B | C | D |
| Screw Diameter | Mm | 90 | 95 | 105 | 110 |
| Screw L/D Ration | L/D | 23.2 | 22 | 19.9 | 19 |
| Shot Size(Theoretical) | cm3 | 2924 | 3258 | 3981 | 4369 |
| Injection Weight(PS) | g | 2632 | 2933 | 3583 | 3932 |
| Injection Rate | g/s | 574 | 640 | 781 | 858 |
| Injection Pressure | MPa | 195 | 175 | 143 | 130 |
| Screw Speed | rpm | 115 |
| Clamp tonnage | KN | 7800 |
| Opening stroke | Mm | 950 |
| Space Between Tie Bars | mm | 980*950 |
| Max.Mold Height | mm | 960 |
| Min.Mold Height | mm | 400 |
| Ejector Stroke | mm | 280 |
| Ejector Tonnage | KN | 186 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 37+30 |
| Heater power | KW | 56.7 |
| Machine Dimension(L*W*H) | M | 11.43*2.40*3.14 |
| Machine weight | T | 37 |
| Oil Tank Capacity | L | 1500 |
