Assistant Pushing Function Auto Pipe Bending Machine For Big
Bending Radius
--Operating system instruction
Automatic mode interface. The automatic mode is that after the
equipment has been manually adjusted (including mold, function, and
parameters), the equipment can automatically carry out mass
production of tubes.
1. File Name: Displays the name of the currently machined workpiece
number.
2. A total of several bends and several bends, showing the
effective number of bends and the current number of bends required
for automatic bending.
3. Set value: Shows the value of Y feed, B corner, and C elbow in
the fitting programming.
4.Current value: current Y feed, B corner, C bend value.
5. Elbow timing: The time taken for a tube to pass from the tube to
completion of processing.
6. The preset output sets the number of pipes to be processed; the
current output shows the number of completed pipes; it helps the
user to master the production schedule. Press Zero to zero the
current yield.
7. Before the automatic operation, you must first press the "Start"
button, then follow the text prompts at the bottom of the interface
to start the foot switch. If you need to pause during automatic
operation, you can press the “pause” button or pause the foot
switch, and then press “pause” or pause to stop the pedal switch to
continue running. If “decomposition action” is ticked, the foot
pedal must be pressed to start the next action every time you
complete a step in the automatic operation.
8. In this interface you can switch to manual mode, single-bend
mode, file management, I/O mode, or back to homepage (open machine
interface).
--Machine details
CNC pipe bending machine is mainly used for electric power
construction, public railway construction, boiler laying, bridges,
ships, furniture, decoration and other aspects of pipe laying and
repair, which has many functions, reasonable structure, simple
operation, easy movement, quick installation and so on. The machine
can also use oil pump as a hydraulic jack. CNC pipe bending
equipment has the advantages of low price and convenient use, and
it occupies the leading position in the domestic bending machine
market. CNC pipe bender can bend the pipe under cold state (single
mode) or two bend radius (double modes). It is widely used in the
bending of various pipes and wires in the automotive and air
conditioning industries.
-- Main technical parameter
| Maximum applicable carbon steel pipe | Ø50.8*2.0t |
| Maximum applicable stainless steel pipe | Ø44.4*2.2t |
| Maximum applicable copper/aluminum pipe | Ø60.0*2.5t |
| *Maximum feeding length | 2400mm |
| *Maximum coring length | 3300mm |
| Feeding mode | Clamping feeding |
| Directed feeding |
| *Maximum bending radius | 250mm |
| Maximum bending angle | 190° |
| *Settable bending angles of each pipe fitting | 36 |
| Bending mode | Hydraulic control |
| Working rate | Bending rate | Max 40°/sec |
| Rotating rate | Max 270°/sec |
| Feeding rate | Max 700mm/sec |
| Working accuracy | Bending angle error | ±0.5° |
| Rotating angle error | ±0.1° |
| Feeding length error | ±0.1mm |
--Mechanical features
1.Display of the whole process of operation in Chinese or English,
and 15 inches true color monitor and touch screen to make simple,
quick and correct programmes.
2.Rebound test, comparison test on the features of lots of pipe
materials.
3.Single step debugging function, a careful observe on the
deformation of the pipe material during the trail manufacture of
dies.
4.Over-all inspection, hydraulic/electrical circuit/driving
systems, absence of phase in motors/inversion, voltage,
temperature, oil pressure and automatically diagnose the troubles.
5.Passwords, keys, working hours and recordings of quantities are
applied to management of production.
6.The servomotor drives the flexure arm to accelerate the movement
speed, and at the same time obtains rapid acceleration and rapid
deceleration, as well as high torque. Precious and heavy-duty
linear rolling bearings are used on the press-contact,
pressure-touch boost system and centerline radius adjustment
system.
7.Direct drive racks and servo motors provide high accuracy and
reliability to the system.
--Company service
1.Payment terms: 30% T/T down payment and 70% T/T before shipment.
2.Delivery time: No later than 15 days since receiving the advance
payment.
3.Validity of the price: For ONE month.
4.Package: Wooden case.
5.Warranty period: We guarantee machine quality for 12 months.
During this period, if spare parts of the machine were damaged, we
can send the component to the customer by international express
service freely.
6.We can send our engineers to the customer’s factory to install
and train for using freely. The customers just need to provide the
double trip tickets, food and accommodation for our engineers. The
customer can also send your staff to our factory to learn the
operation and maintains freely.
7.Our factory provides service for customers forever, if the
customer needs operation help or technical guidance, you can
contact us by Email or telephone at any time, we provide 24 hours
on-line service.
--Pictures of machine
