Starch separation decanter centrifuge,continuous operation
separator
Packaging Details
Hot selling horizontal centrifuge wheat starch decanter separator
1 . Standard export package of spiral elevator complying with IPPC
rules.
2 . Outside package:Standard export plywood cases.
3 . Inner package:whole machine coated with shrink film.
4 . Fumigation certificate available to all of the country.
5 . Packing declaration available to Australia.
6 . CIQ to Egypt available.
Brief introduction of the starch separation decanter centrifuge
Decanter centrifuge uses the centrifugal sedimentation to separate the suspension,
uses the spiral to unloading material.It is continuously charging,
separating, discharging at full speed.
It is used in the suspension(in 0.0005~2mm, concentration 2-40%)
solid-and-liquid separation, size classification, liquid
clarification .
Especially ,it issuitable for the suspension separation that with
difficult in filter cloth recycling, and the material with large
concentration and big size range.
Detailed Product Description| Diameter | 250mm | Voltage : | 220V, 380V,440V,460V |
| Speed | Inverter Control | Electrical Components: | World Famous Brand |
| Operation | Continuous | Separation : | Three phase |
| Bearing | SKF | Material : | SS304, SS316L, SS2205 |
| Control | PLC | Motor : | 2 |
How to choose the suitable type centrifuge?
The user can choose the working parameters of the centrifuge
according to the physical properties, separation requirements,
processing ability and process requirements of the separated
materials (suspension), so that the satisfactory separation effect
and economic benefit can be obtained.
Characteristics of the suspension material
a , the larger the solid particles in the material, the easier to
separate, solid particles of different sizes, small particles solid
phase to determine its final separation effect, the machine can
generally remove more than 5um solid particles, solid particles are
particularly small.
The separation effect depends on the distribution of solid
particles of the material, more than 5um particles, the better the
separation effect, the contrary, the worse the separation effect.
b , the general crystalline solid phase and fiber-like solid phase
easier to separate, floc, paste solid phase is difficult to
separate, because the floc paste solid phase of the largest
water-soluble large, easy to slip and affect the separation effect, so the separation of
floc and paste solid phase flow should not be too large.
c , the greater the difference between the solid phase and the
liquid phase, the better the separation, and vice versa the worse
the separation effect
d , liquid viscosity is smaller and easier to separate, the higher
the liquid viscosity, the clarification solution entrainment
increased solid phase, the separation effect is poor, then can
improve the material temperature, reduce viscosity to improve the
separation effect (the maximum feed temperature is not Greater than
95 ° C.
Other reference factors such as the choice of feed flow (ie, the
amount of treatment); the diameter of the overflow; the speed of
the drum: the difference between the helix and the drum, etc., have
different reference standards
| Model | Drum diameter
mm | Draw Ratio
L/D | Speed of drum
r/min | Factor of
separation G | Spiral difference
rotate speed
r/min | Inlet
capacity(m3/h) | Main/assist
motor (KW) |
| LW250 | 250 | 3.73 | 4200 | 2467 | 2~31 | 1-7 | 11/4 |
| LW350 | 350 | 4.4 | 3600 | 2540 | 5~25 | 5~18 | 22/5.5 |
| LW450 | 450 | 4.4 | 3200 | 2580 | 5~25 | 5~28 | 30/11 |
| LW520 | 520 | 4.1 | 2850 | 2365 | 2~26 | 10~35 | 45/11 |
| LW550 | 550 | 4.1 | 2650 | 2370 | 2~26 | 10~45 | 55/11 |
Application:
Decanter centrifuge is most often used for clarification of liquid
containing high concentrations of solid, removing solids from
liquid. It is usually used in waste water and PVC sludge industry.
And also can be used in sunflower oil, palm oil and tea industry.
Introduction of Company:
Juneng Group employs a team of well-trained professional, adopts
advance EPR production management model in cooperation with
state–of–the–art apparatus and process i.e. CNC Turner, Machine
Center, Highly Accuracy Test Instrumentation, Quality and Process
Control System to ensure quality, stability, and reliability of
every product.
Juneng’s success is contributed by the commitment of every member
of the Company. In addition, the specialty and potential of each
member is being respected and disinterred.
After-sales Service Technical Team
Our company has set up a professional after-sales service technical
team. All sell-offs products shall have engineer to guide
installation, assist debugging and train operators until they have
mastered them.
If problem occurs while the equipment operation, we will
immediately process it, promise to feedback within two hours after
informed. After-sales service engineer shall be arranged to the
site to solve the problems. He will never leave, until the user
satisfaction.
