4V330C-10 3/8'' Pneumatic Control Solenoid Valves Two Coils Double
Control Automation Components
Pneumatic solenoid valves are widely used in industrial robots. The
robot's actions are all done with solenoid valve control cylinders.Industrial robot is a multi-joint manipulator or multi-degree of
freedom machine device for the industrial field, which can
automatically perform the work. The instruction signal is transmitted to the driving mechanism to
enable the actuator to reproduce various actions of
teaching.Greatly reduce the utilization of human resources and
improve industrial efficiency.
Technical data of 4V330C-10 pneumatic control solenoid valve in CNC
automation machinary:
| Models | 4V310-10 | 4V320-10 | 4V330C-10 | 4V330E-10 | 4V330P-10 |
| Position number | Two positions Five ways | Three positions Five ways |
| Operating medium | 40 Mircon litered Air |
| Action type | Internally pilot action |
| Wiring Form | Lead wire or Connector type |
| Packing dimension | 13.52x2.7x4cm | 19.04x2.7x4cm | 20.94x2.7x4 cm |
| Highest action frequency | 5 cycles/ 1 second |
Internal structure diagram of 4V330C-10 pneumatic solenoid valve
automation products:
Production environment and equipment of 4V330C-10 pneumatic
solenoid valves in automation system:
Packing and delivery of 4V330C-10 pneumatic solenoid valve for
automatic machines:
How do Industrial robots working with 4V pneumatic solenoid valve?
Industrial robots are classified into two types: programming input
type and teaching input type. The programming input type is to
transfer the programmed program files on the computer to the robot
control cabinet through RS232 serial port or Ethernet
communication.
There are two teaching methods for teaching input type: one is that
the operator uses a manual controller (teaching operation box) to
transmit the command signal to the drive system, so that the
actuator can perform the required action sequence and motion
trajectory. The other is that the operator directly leads the
actuator and performs it according to the required sequence of
motions and motion trajectories. At the same time as the teaching
process, the information of the working program is automatically
stored in the program memory. When the robot automatically works,
the control system detects the corresponding information from the
program memory, and transmits the command signal to the drive
mechanism, so that the actuator can reproduce the teaching. Various
actions. The industrial robot that teaches the input program is
called a teaching and reproducing industrial robot.
Industrial robots with tactile, force or simple vision can work in
more complex environments; if they have recognition functions or
further increase adaptive, self-learning functions, they become
intelligent industrial robots. It can adapt to the environment
according to the "macro" selection or self-programming given by
people, and automatically complete more complicated work.
Welcome to your inquiry!
