4V 400Series 1/2'' Double Coils Pneumatic Solenoid Valve In
Automation Machine
Pneumatic solenoid valve is a kind of industrial equipment with
electromagnetic control fluid, that is a solenoid valve, through
the control valve body movement blocking the hole, pressure to push
the piston work, using the electromagnetic current control of the
whole solenoid valve operation. Pneumatic solenoid valve in the
vacuum, negative pressure environment can also work normally.
Technical data of 4V430C-15 Pneumatic solenoid valve in automation
equipment:
| Model numbers | 4V410-15 | 4V420-15 | 4V430C-15 | 4V430E-15 | 4V430P-15 |
| Position numbers | two positions five ways | three positions five ways |
| Working medium | 40 micron filtered air |
| Action type | Internally pilot actuated |
| Wiring form | Lead wire or connector type |
| Packing dimension | 16.9x3.4x5cm | 22.34x3.4x5cm | 24.44x3.4x5cm |
| Standard voltage | DC12V DC24V AC24V AC110V AC220V AC380V |
Power ON/OFF Working schematic diagram of 4V pneumatic solenoid
valve for automation machines:
The figure below is a schematic cross-sectional view of a
two-position five-way solenoid valve, where A B R P S is five air
pipe connections. In general, A and B are connected to the two
interfaces of the double-acting cylinder; P is connected to the air
supply; R and S can be disconnected, and the silencer can also be
connected. The silencer is a porous object. When the airflow passes
through it, the sound is small, which is used to reduce the noise
of the pneumatic system.
Inlet,Outlet,Exhaust & Working hole of 4V430C-15 Pneuamtic solenoid
valve in pneuamtic system:
Packing pictures of 4V430C-15 G1/2'' pneumatic solenoid valves:
- Classification of 4V series pneuamtic solenoid valves for
actuators:
There are a variety of classifications for solenoid valves:
1. According to the manipulation method, there are two types:
direct action type and pilot type.
2. According to the structure, there are three types: sliding
column type, cut-off type and coaxial cut-off type.
3. according to the sealing form: elastic seal and gap seal two.
4. According to the number of ports and the number of positions,
there are 2 ports with 2 ports, 2 ports with 3 ports, 2 ports with
4 ports, 3 ports with 3 ports, 3 ports with 4 ports, 2 ports with 5
ports and 3 ports with 5 ports. Three valves are divided into
central pressure, central closure and central exhaust three.
- Specific classification of 4V pneuamtic solenoid valves in
automation:
Above a variety of solenoid valve classification, now more common
classification simply in the following to do an introduction:
1. Direct acting:
Direct - acting solenoid valve is the use of electromagnetic force
to directly promote the valve stem (spool) reversing. According to
the control mode of valve core reset, there are two kinds of single
electronic control and double electronic control. Single electric
control using spring reset, double electric control using
electromagnetic reset. The characteristics of direct acting
solenoid valve are compact structure and high commutation
frequency. Now more common direct - acting solenoid valve for small
2 - way valve.
2. Pilot solenoid valve:
Pilot type solenoid valve is composed of small direct solenoid
valve and large air control valve, also known as electronic control
reversing valve. According to the pilot solenoid valve air control
signal source can be divided into automatic control (internal
pilot) and other control (external pilot) two types.
Welcome to your inquiry!
