Lab Ball Mill All-Directional For Dry & Wet Grinding Ball Mill
Motor Direct Connection
Application:
It is widely used in geology,mineral,metallurgy,electronic,building
material,ceramic,chemical,light
industry,medicine,beauty,environment production,tea and so on. Our
company have the laboratory with 1000 sets of application cases and
maybe could provide you some suggestion.
Feature of MITR 360 degree full direction planetary ball mill
1.Window: which could see clearly in the room
2..Pneumatic bar stay: Which bracing the cover on working and
convenient and safety operation
3.Damping blanket: Which inlaid on the edge of the cover to prevent
the noise and damage when open and close the cover.
4.Operation panel:It is convenient to operate and flexible
operation
5.Grinding with four ball mill jars:We adopted the new style
pressure bar,the revolution speed is stable and high efficiency and
the granularity finer
6.Under high speed working,effectively enhance the air flowing
speed of the body and high efficiency loss of heat, ensuring the
normal working.
7.Professional design and super function which is 360 degree whole
direction revolution. Grinding omnidirectional and more finer
8.Own design of gear and convenient to move.
9.Ensures the consistency and repeat-ability of the experiment.low
noise,high efficiency,function comprehensive,small volume.
10.It can solute the problems for the deposition and sticking of
some materials and four samples could be obtained with different
sizes in one experiment.
11. MITR 360 degree omnidirectional planetary ball mill 2L is the motor
direct connection
Techincal parameter:
| Brand Name | MITR  |
| Model | 360 degree rotating omnidirectional planetary ball mill-
MITR-QMQX-4L |
| Single Jar Grinding and Total Volume | 1lL*4=4L(Vacuum jar selection 500ml) |
| General grinding jar material selection | Metal material selection:304 stainless steel,Tungsten carbide(YG8) |
| Nonmetal material selection:ceramic / corundum / alumina, zirconia,
agate |
| high polymer material selection:Nylon, polyurethane,
polytetrafluoroethylene(PTFE) |
| General grinding ball material selection | Stainless steel,ceramic,corundum,alumina,zirconia, agate, tungsten carbide |
| Maximum loading per jar | Raw material and grinding ball less than 1/3 of grinding jar |
| Feeding granularity | Friable material less than 10mm,others less than 3mm |
| Discharging granularity | minimum up to 0.1μm |
| Grinding Method | Dry grinding / wet grinding / high energy alloying grinding /
vacuum grinding(need customized) / low temperature grinding(need
customized) |
| Planetary speed (variable frequency adjustable) | Max Revolution 0-400r/min,Rotation 0-800r/miPlanetary total
speed:0-3200r/min |
| 360 degree speed(variable frequency adjustable) | 1-14/min |
| speed ratio(revolution:rotation) | 1:2 |
| Adjusting speed control method | PLC Frequency conversion control system,Touch screen control system |
| Driving style | Gear drive |
| Grinding ball ratio(the detail ratio contact customer service)The
right sheet is just for reference.In fact that we are matching
according to the customer requirement. | General grinding over 800 mesh(5mm;10mm;15mm) feeding material less
than 3mm |
| Fine grinding 800-1500 mesh(3mm;5mm;10mm;)feeding material less
than 1mm |
| Super fine grinding over 1500 mesh(0.1~10μm)(1mm;3mm;5mm)feeding
material less than 200 mesh |
| Voltage | 220V |
| Power | 0.75Kw |
| Working method | Two or four cans working at the same time |
| Maximum continue working time | 72h(Timing 0-9999h) |
| Programmed control | The ball grinding used for high-tech micro computer chip control.It
can run alternately for positive turn and reverse turn(0-999min),
and run alternately for positive turn and pause,reverse and
pause,and than positive run. It is especially suitable for cooling
or intermittent operation. |
| Weight | 200kg |
| Dimension | 95*55*65cm |
| Features (direct motor connection) | The only one which have the drive mode with speed reducer with
motor direct drive in the market,have replaced of traditional belt
drive mode.In the past, the ball mill was mainly driven by a belt,
and all the gravity is on the belt. After running for a long time,
the belt is easy to aging, skid, fracture and so on. There is the
direct speed reducer with motor to installed into the planetary
master disk in our company,its stability is more 5 times higher
than that of belt.And also there is no belt replacement every 3
months during the later maintenance.It has applied for patent
protection for planetary ball mill with motor direct drive. |
Catalog:
| Model | Spec | With ball mill jar | Remarks |
| | Spec(ml) | Quantities | |
| QM—QX0.4L | 0.4L | 50-100ml | 2 or 4 | With 50ml vacuum ball mill jar |
| QM—QX—1L | 1L | 50-250ml | 2 or 4 | With 50-100ml vacuum ball mill jar |
| QM—QX—2L | 2L | 50-500ml | 2 or 4 | With 50-250ml vacuum ball mill jar |
| QM—QX—4L | 4L | 50-1000ml | 2 or 4 | With100-500ml vacuum ball mill jar |
| QM—QX—8L | 8L | 500-2000ml | 2 or 4 | With250-1000ml vacuum ball mill jar |
| QM—QX—10L | 10L | 500ml-2.5L | 2 or 4 | With 250-2.5L vacuum ball mill jar |
| QM—QX-12 | 12L | 1L-3L | 2 or 4 | With 500-3L vacuum ball mill jar |
| QM—QX-16 | 16L | 1L-4L | 2 or 4 | With 500-4L vacuum ball mill jar |
| QM—QX-20L | 20L | 1L-5L | 2 or 4 | With 1000-5L vacuum ball mill jar |
| QM—QX-40L | 40L | 4L-10L | 2 or 4 | With 3L-10L vacuum ball mill jar |
| QM—QX-60L | 60L | 6L-15L | 2 or 4 | With 5L-15L vacuum ball mill jar |
| QM—QX-80L | 80L | 6L-20L | 2 or 4 | With 5L-20L vacuum ball mill jar |
| QM—QX-100L | 100L | 10L-25L | 2 or 4 | With 9L-25L vacuum ball mill jar |
| Model | Voltage | Motor power(KW) | Inverter power KW | Total timing(min) | Alternating Run Time | Rotation speed r/min | Noise ≤db |
| Revolution speed | Rotation speed |
| QM-QX0.4L | 220V 50HZ | 0.55 | 0.55 | 1-9999 | 1-9999 | 5-450 | 10-900 | <50db |
| QM-QX1L | 220V 50HZ | 0.75 | 0.55 | 1-9999 | 1-9999 | 5-400 | 10-800 | <50db |
| QM-QX2L | 220V 50HZ | 1.1 | 0.75 | 1-9999 | 1-9999 | 5-400 | 10-800 | <50db |
| QM-QX4L | 220V 50HZ | 1.1 | 0.75 | 1-9999 | 1-9999 | 5-400 | 10-800 | <50db |
| QM-QX8L | 220V 50HZ | 1.5 | 1.5 | 1-9999 | 1-9999 | 5-320 | 10-640 | <50db |
| QM-QX10L | 220V 50HZ | 1.5 | 1.5 | 1-9999 | 1-9999 | 5-320 | 10-640 | <50db |
| QM-QX12L | 380V 50HZ | 1.5 | 2.2 | 1-9999 | 1-9999 | 5-320 | 10-640 | <50db |
| QM-QX16L | 380V 50HZ | 2.2 | 2.2 | 1-9999 | 1-9999 | 5-280 | 10-560 | <50db |
| QM-QX20L | 380V 50HZ | 3 | 4 | 1-9999 | 1-9999 | 5-230 | 10-460 | <50db |
| QM-QX40L | 380V 50HZ | 3 | 4 | 1-9999 | 1-9999 | 5-220 | 10-440 | <50db |
| QM-QX60L | 380V 50HZ | 4 | 5.5 | 1-9999 | 1-9999 | 5-180 | 10-360 | <50db |
| QM-QX80L | 380V 50HZ | 5.5 | 5.5 | 1-9999 | 1-9999 | 5-180 | 10-360 | <50db |
| QM-QX100L | 380V 50HZ | 7.5 | 7.5 | 1-9999 | 1-9999 | 5-180 | 10-360 | <50db |
Mill jars and Mill balls
Our factory can provide 304 stainless steel jar,Tungsten carbide jar(YG8),ceramic jar,corundum/alumina jar, zirconia jar, agate jar.nylon jar, PU jar, PTFE jar.We can also provide the balls material of stainless steel,ceramic,corundum,alumina,zirconia,agate, tungsten
carbide.
Grinding Media
Company Information
Changsha Mitrcn Instrument Equipment Co., Ltd. specializes in
designing, manufacturing and selling experimental equipment.
Supported by the state key laboratory of Central South University
Powder Metallurgy with Hunan University, Shanghai Jiao tong
University and other well-known universities to maintain long-term
close technical exchanges and product development cooperation.
The high-tech talents in our company are: doctor, master, eight
senior engineer,eight senior technician, ten engineer,six
technician.The main business is the R&D, production and sale of
experimental equipment and related technical consultation services.
