IPC Structure Dual APC UPC Polish Jig / Zig For SC Fiber Optic
Connector
The fiber polishing fixture is IPC Structure, Independent
compression of each connector. The fiber polishing fixture pass
rate with Interference> = 98% (100% Typical, according to IEC),
This fiber polishing fixture is high stability and good surface
quality.
fiber polishing fixture using high quality steel with heated treat,
the hardened steel S2316 provide long service life. This fiber
polishing fixture can be designed with the jig of SC, FC, ST, LC,
MPO and E2000, FA, etc, and also according to the customer request.
Key Features:
• Designed for polishing manner with planet tray
• Using a new I.P.C jig technology (every ferrule is pressed
singly) and making the finished yield rate much higher
• Dual APC &UPC polishing and Accommodating most styles of
connectors
• High efficiency to deal with all kinds of connectors. The maximum
polishing quantity for MU and LC connectors is 24 pcs; And maximum
polishing quantity for SC, FC and ST connectors is 20 pcs
• The polisher was made by high quality stainless steel with heat
treatment and it is high accuracy and durability
• Quick to change jigs, Easy and flexible to operate
• APC return loss as low as -70 dB, UPC return loss as low as -60
dB, Insertion loss 0.2 dB typical
• Super centering accuracy
• Excellent connector end-face polishing quality
