High performance peanut peeling machine with low breakage rate
Production Instruction
1. Peanut is fed into the feeding hopper by manual feeding, and the
shell and kernel of the peanut are peeled off by the squeezing
force between the rotation of the pattern and the curved grid. The
peeled peanut kernel and the shell fall simultaneously through the
front curved grid.
2. When passing through the air duct, most of the peanut shells are
blown out of the machine by the wind of the upper fan, and the
peanut kernels and a part of the peanut fruit that has not been
peeled off are dropped onto the specific gravity sieve for sorting,
and the sorted peanut kernels are sorted and dried.
3. The unpeeled peanut fruit is descended from the sorting surface
and flows into the lifting device through the feeding port. The air
is sent to the lifting device to be secondly peeled off in the
drum, and the peeled kernel and shell are dropped through the rear
curved grid.
4. Once again, the fan is selected by air blower, and the specific
gravity sorting screen is selected. After repeated, all shelling
can be achieved.
Parameter
| Model | 6SS | 6SD | 6DD |
| Breakage rate | ≤5% | ≤5% | ≤5% |
| Weight | 370kg | 420kg | 450kg |
| Voltage | 380V | 380V | 380V |
| Power | 1.5kw | 1.5kw | 1.5kw |
Detail Images
Peanut sheller in multiple angles:
Packing & Delivery
Packing:
1. Wooden case.
2. Customized.
Delivery:
5-7 working days after receipt the deposit.
Our service
Pre-service:
1. We will test and adjust before we send the machine, make sure it
can be used with confidence after receiving it.
2. We accept the customized model.
After-service:
1). The equipment guarantee period is one year, During guarantee
period, the seller will provide maintenance free service.(Except
the breakdown and destroy caused by person and force majeure)
2). After receiving the inquiry for repairing the engineer of sell
party will solve by phone and email, if necessary the engineer will
go to solve the problem on the spot, the buyer should pay daily
salary $100, also pay technical visa cost, round trip tickets,
rooms and meals.
3). During the quality guarantee period, if it is the quality
problem (except easily damaged parts), the cost for maintenance and
replace will be borne by sellers.
4). During guarantee period, the seller will provide service of
with compensation as follows:
(1)The damage caused by person and force majeure;
(2)The damage caused by improper operating;
(3)The damage caused by reforming, decomposing assembling.
5). Paid service will be provided for the long term after guarantee
period.
Contact us
We don't make bad products, don't produce defective products, zero
defect production process, 100 points of quality products, 1%
defect = 100% of waste products.
If you are interested in our machine, we will offer you videos of
testing the machines.
