2.3L Canister Automatic Paint Colorant Dispenser Systems Corrosion Resistance

846(L)*758(W)*1398(H) MM

1. Ceramic valve structure, with good corrosion resistance and good sealing,stable and reliable.
2. The rolling brush will clean seal ring of nozzle automatically.
3. Simple electrical system,easy to maintain.
4. Adjustable upward speed and dispensing speed of every colorant.
5. The undispensed nozzle will dispense a little colorant in a specified time to keep the colorant from drying,which can effectively prevent the nozzle from blocking.
6. Automatic stirring at set time, prevent the colorant inside canisters from subsidence.Piston pump ensure you precise measurement,free of calibration life-long.
7. Driver software use the same Flink.dat file as CPS/Hero/Lenteq,and Formula.txt file as TECMEC,it’s compatible with worldwide major color software.

Driver 50 is a user Software Package developed for our range of Automatic Paint Dispenesr machines. The package will assist the user in carrying out the following operations:

1. Dispensing: Read the data from formula software and start dispensing;
2. Manual Dispensing: The dispensing under this function can be done without formula software. The user can choose any colorants from the dropdown list, decide the amount for each colorant, and dispense here.
3. Colorant management: manage all the datas of colorant.
4. Debug: test each function of the machine manually;
5. Pump calibration: calibrate the pulse data of each canister pump;
6. Presentation management: translate the display language into your local language.

• Training:You can send personnel to our factory for free training on the machine.
• Inspection: You can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.
• Testing of equipments: all our machines are tested before shipment. All machines are at its optimal state when shipped.

• Limited Warranty: We provide a one year warranty for each equipment. Within guarantee period, we can help you judge the fault according to the failure phenomenon via Internet way and send replacement part to you.
• If the fault has been caused by mis-used or abnormal conditions of operation, repairs will be billed at a normal cost in this case. An estimate will be submitted before repair work is started in case requested.