1 inch Right Angle Aluminum Pneumatic Pulse Valve With NBR
Diaphragm DMF-ZM-25
DMF-ZM pulse valve, is also called speed-linked pulse valve, has
the characteristics of high sensitivity, large displacement and
stable operation, and has the characteristics of convenient
installation, use and maintenance.We also have other types of
pneumatic pulse valve,if you need more information,pls contact us.
Specification
Working pressure:0.4~0.6MPa
Working medium: Compressed clean air
Voltage:DC24V, AC24V, AC110V, AC220V/50HZ
Temperature:-10°C~55°C
The relative humidity of air not exceeding 85%
Service life of diaphragm:1 million times
| Type | Orifice Size | Diaphragm Number | Inlet port | Outlet port |
| DMF-ZM-20 | Φ20 | 3/4” | 1 | Φ27 | Φ27 |
| DMF-ZM-25 | Φ25 | 1” | 1 | Φ34 | Φ34 |
| DMF-ZM-40S | Φ40 | 1 1/2” | 2 | Φ48 | Φ48 |
Deminsion of Drawing of Dmf-zm-25
Professional production workshop
Characteristics
1. The use of direct-acting diaphragm structure 0 pressure start,
expanding its field of use.
2. The flat diaphragm structure is reliable in opening and closing,
and the service life of the product is enhanced.
3. The use of plastic coils can improve the safe use of this
product in many environments.
Use maintenance and troubleshooting
1. It is recommended that the employer assign a person to be
responsible for operation and maintenance.
2. Regular maintenance of 1-2 times a year to make the solenoid
valve work reliably and longevity. The following four conditions
inside the solenoid valve are the reasons that hinder the normal
operation of the solenoid valve and shorten the life.
3. The medium changes during use
4. Rusting inside the takeover
5. The oil of the air compressor is oxidized to produce carbon
particles such as tar and mixed into the pipeline.
6. There are impurities such as dust and dirt in the pipeline.
7. When the solenoid valve is installed or is put into operation
after long-term use, it must pass through the medium and try to
operate several times. After working normally, it can be used
formally.
8. When the steam valve is put into operation after a long time of
use, the common sense action should be performed several times
after the condensate is drained, and it can be used officially
after normal operation.
9. The power must be turned off and the media pressure removed
before maintenance.
10. The coil assembly should not be disassembled
11. After disassembling and cleaning, all kinds of parts should be
restored in order.
12. After disassembling and cleaning, all kinds of parts should be
restored in order.
please care the products details at our website, any confuse please
contact us or Note your request online. Big quantity purchase
,please contact our online service to ask more economic shipping
way or discuss the more pretty price.
if you have something unclear,welcome to contact us,you can write
email to us.
Wait your inquiry!
