Trox Drive CS Flat head With Ribs ,Knurled shank , Cut thread ,Type
17 Slash Specail Chipboard screws
| MODE |
M2.5, M3,M3.5 ,M4,M4.5, M5,M6
|
| LENGTH |
20----200 mm |
| SURFACE |
Zinc Plated , RUSPERT . |
| PACKING |
1000PCS/BOX ,BULK PACKING , OEM as customer's request |
| APPLICATION |
Wood, Chipboard, Plastic,Timber outdoor use |
Chipboard screws or MDF screws, They are made of carbon steel or
stainless steel and then galvanized. Chipboard screws of different
lengths can be used in a variety of applications. They are created
to fasten low, medium and high density chipboard. Many chipboard
screws are self-tapping, so there is no need to drill holes in
advance. Suggest to use on timber to timber connection
- Type 17 super-sharp screws with reduced pre-drilling requirement.
- Self-countersinking cutting nibs with flat head for clean finish.
- Deep, sharp serrated threads cut through fibrous material, reducing
torque required to drive the screw.
- Next generation lubrication system requires almost half the torque
to drive over conventional screws.
- Knurled shank ribs reduce further the installation torque required.
- Helps prevent wood splitting, cleans the hole and prevents jacking
when joining two pieces of timber.
- Star drive recess reduces cam out and end load.
- Recess sizes T10 to T30 match screw torque requirement.
- Optimised thread lengths prevent cross threading and jacking,
pulling wood together first time.
Question & Answer
1. Payment : T/T (30% T/T in advance and balance 70% against copy of B/L)
L/C at sight
2. Lead Time : If have stock , can be packing and ship within 10-15 days ,
If not have stock , usually take 25-30 days to produce one
container order .
3. Free Sample : For standard item , we can supply the samples free . courier cost
by the buyer.
For nonstandard item , we will quote the mould charge ineed, but
the mould charge can be return if bulk order released .
4. OEM : We Can produce the drawing according to your drawing or samples
, also can packing the products as customer's request with LOGO and
company information on it
5. How to place a order :
Send inquiry -------quotation --------Confirm order (price ,lead
time , technical detail with drawing and payment ) ---------pay
deposit -------Start to produce after got deposit ---------sample
approve (if need) ------------mass produce -----send picture of
packing for confirm------arrange shippment ---------send copy of
B/L -------------Pay balance payment ----------send the documents
for clearance ----------feedback
6. Anyother question , welcome to contact us anytime .
