Phillips bugle head drywall screws, double thread hardened, black phosphated
Drywall screws are a type of self-tapping fastener, which means
that there is no need to pre-drill holes. These screws almost
always have a Phillips head rather than a slotted head, which
provides additional control for installers. Instead of a standard
drill, installers use a tool known as a drywall dimpler, which has
an adjustable nose to install a drywall screw without tearing the
paper on each sheet.
black phosphated helps to minimize rusting and corrosion
APPLICATION :
Plaster board
- Hollow concrete
- Hollow brick
- Plaster
the sharp point on these screws allows you to screw them directly
into the drywall without pre-drilling
| MODE |
M3.5,M3.9, M4.2,M4.8 |
| LENGTH |
25,32,38,42,45,50,55,60,65,75,90,100,125,150 mm |
| SURFACE |
Black phosphated, Grey phosphated, zinc plated |
| PACKING |
1000PCS/BOX ,BULK PACKING , OEM as customer's request |
| APPLICATION |
Dryall Wood, Chipboard, Plastic |
|
Size(mm) | Size(Inch) | Size(mm) | Size(Inch) | Size(mm) | Size(Inch) | Size(mm) | Size(Inch) |
3.5*12 | #6*1/2 | 3.5*65 | | 4.2*13 | | 4.2*102 | |
3.5*16 | | 3.5*75 | | 4.2*16 | | 4.8*51 | |
3.5*19 | #6*3/4 | 3.9*20 | #7*3/4 | 4.2*19 | | 4.8*65 | |
3.5*25 | #6*1 | 3.9*25 | #7*1 | 4.2*25 | #8*1 | 4.8*70 | |
3.5*29 | | 3.9*30 | #7*1-1/8 | 4.2*32 | #8*1-1/4 | 4.8*75 | |
3.5*32 | #6*1-1/4 | 3.9*32 | #7*1-1/4 | 4.2*34 | | 4.8*90 | #10*3-1/2 |
3.5*35 | #6*1-3/8 | 3.9*35 | #7*1-3/8 | 4.2*38 | #8*1-1/2 | 4.8*100 | #10*4 |
3.5*38 | #6*1-1/2 | 3.9*38 | #7* 1-1/2 | 4.2*40 | #8*1-5/8 | 4.8*115 | #10*4-1/2 |
3.5*41 | #6*1-5/8 | 3.9*40 | #7* 1-5/8 | 4.2*51 | #8*2 | 4.8*120 | |
3.5*45 | #6*1-3/4 | 3.9*45 | #7* 1-3/4 | 4.2*65 | #8*2-1/2 | 4.8*125 | #10*5 |
3.5*51 | #6*2 | 3.9*51 | #7* 2 | 4.2*70 | | 4.8*127 | |
3.5*55 | | 3.9*55 | | 4.2*75 | #8*3 | 4.8*150 | #10*6 |
3.5*57 | #6*2-1/4 | 3.9*65 | #7* 2-1/2 | 4.2*90 | #8*3-1/2 | 4.8*152 | |
Question & Answer
1. Payment : T/T (30% T/T in advance and balance 70% against copy of B/L)
L/C at sight
2. Lead Time : If have stock , can be packing and ship within 10-15 days ,
If not have stock , usually take 25-30 days to produce one
container order .
3. Free Sample : For standard item , we can supply the samples free . courier cost
by the buyer.
For nonstandard item , we will quote the mould charge ineed, but
the mould charge can be return if bulk order released .
4. OEM : We Can produce the drawing according to your drawing or samples
, also can packing the products as customer's request with LOGO and
company information on it
5. How to place a order :
Send inquiry -------quotation --------Confirm order (price ,lead
time , technical detail with drawing and payment ) ---------pay
deposit -------Start to produce after got deposit ---------sample
approve (if need) ------------mass produce -----send picture of
packing for confirm------arrange shippment ---------send copy of
B/L -------------Pay balance payment ----------send the documents
for clearance ----------feedback
6. Anyother question , welcome to contact us anytime .
