SJSZ65 Twin screw extruder 16-32mm PVC Four Electrical Pipe
Production Line
Devices list:
| Item | Device Name | Qty |
| 1 | SJZ-65 conical twin screw extruder | 1set |
| 2 | Mould (including: mouthpiece,core mandrill,sizing
sleeve,Φ16.20.25.32mm) | 1 set |
| 3 | 1 for 4 PVC pipe vacuum water tank | 1 set |
| 4 | 1 for 4 PVC pipe hauling-cutting chip-free combination | 1 set |
| 5 | 1 for 4 PVC pipe discharge shelf | 1 set |
Summary:
1．Maximum Capacity: it can reach 5-7 ton per 24 hours depend on
formula of 20KG~40KG CACO3
2．Water supply:≤25℃,≥0.3Mpa
3．Air supply:0.3m³/min,>0.5 Mpa
4．Temperature:0-40℃
5．Humidity:95% no condensation
6．Installation power:89kw
7. Total Length:25 meters
Features specifications:
1. Four cavity extrusion,a production line produces four pipes at
the same time in high efficiency.
2. Each station of downstream is separate control,like each station
of vacuum calibrating,vacuum abnormal alarm, hauling ,cutting ,and
stacker,its convenient during operation.
3. Line speed of each station reach to 15m/min,take 16*15 per 24
hours for example.it is up to 5-7 ton.
4. Unique non swarf double cutting device,light structure,fast
cutting speed,smooth incision,perfect cutting end.
Maintenance method:
1. After 500 hours of use, there will be iron scraps or other
impurities from the gears in the gearbox. Therefore, the gears
should be cleaned and the gearbox oil should be replaced at the
same time.
2. After a period of use, perform a thorough inspection of the
extruder and check the tightness of all screws.
3. If the main power supply and heating are stopped suddenly during
production, when the power supply is restored, the barrels must be
reheated to the specified temperature and kept warm for a period of
time before the extruder can be started.
4. If the steering fullness of the meter and the pointer is found,
check whether the contact of the edge such as the thermocouple is
good.
Zhangjiagang Beisu Machinery has a professional and dedicated
after-sales service team to provide customers with a full range of
responsible and reliable service. Our customer service work is
divided into three phases: pre-sales program discussion and design,
production tracking and installation and commissioning, and
after-sales service and maintenance.
Pre-sales program discussion and design:
According to the customer's actual crushing or processing line
requirements, provide customers with the corresponding professional
knowledge explanation; at the same time, our engineering team
selects the equipment model for you, customizes the most reasonable
and effective crushing scheme, and ensures the perfect combination
of our equipment and site layout. Create the greatest value and
leave you carefree.
We provide customers with the design of the production line
process, and truly design a satisfactory and reasonable production
line for customers. Often, in order to meet the special needs of
our customers and achieve the best results, we will make
non-standard design changes to our products and treat every
customer with care.
