Filter Press Fabric Sludge dewatering network Van filter cloth
The filter cloth of filter press is mainly suitable for
solid-liquid separation and sludge dewatering. It not only has good
air permeability, water permeability and material impermeability,
but also has a good design method, which makes the material easy to
peel off after filter press and easy to clean. The filter belt has
a long service life. It is a special design product for
solid-liquid separation. Especially sludge dewatering.
Industrial wastewater treatment and dewatering treatment in food,
chemical, mining and various industrial processes.
Technical specifications of filter belt of sludge dewaterer | press
filter:
Permeability: Air volume per unit time passing through the filter
cloth per unit area on both sides of the filter belt under the
prescribed pressure difference
Permeability: The volume of water passing through the filter cloth
per unit area per unit time under the specified water pressure
difference on both sides of the filter belt
Permeability resistance: water viscosity and filtration resistance
formed by the filter belt itself;
Maximum Bubbling Pore Diameter: Pore Boiling Pore Diameter when the
gas passes through the maximum pore of the filter band to produce
the first series of bubbles in water: Most of the pore of the
filter band is opened by gas, and the number of bubbles is the
largest, and the surface of water is boiling, then the measured
pore size.
Bubble aperture ratio: the ratio of average boiling aperture to
maximum bubbling aperture;
Porosity: The proportion of pore volume per unit volume of filter
belt;
Thickness Wear Rate: The thickness wear of the filter belt when
1000CN is loaded and the grinding wheel type A-150 is milled 104
revolutions.
Press filter belt is mainly used for sludge dewatering, paper
washing, coal washing, chemical industry, wine bran dewatering and
other industries. Different specifications and sizes can be
customized.
