Eco Friendly Pneumatic Diaphragm Pump With Good Self Priming
Performance
Pneumatic Diaphragm Pump Introduction
Pneumatic Diaphragm Pump are machines for conveying or pressurizing
fluids. The pump is mainly used to transport water, oil, acid and
alkali liquid, emulsion, suspending emulsion and liquid metal, and
also can transport liquid, gas mixture and liquid containing
suspended solids. Pumps can generally be divided into three types
according to their working principles: volumetric pumps, power
pumps and other types of pumps. According to the driving method, it
can be divided into electric pump and water wheel pump,
single-stage pump and multi-stage pump according to the structure,
boiler feed pump and metering pump according to the use, and water
pump, oil pump and mud pump according to the nature of liquid
delivery. According to the shaft structure, it can be divided into
linear pump and traditional pump. Pumps can only transport fluid as
the medium of logistics, not solid.
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.6 |
| 2 | Maximum flow rate | 1/Min | 27 |
| 3 | Maximum lift | M | 45 |
| 4 | Maximum outlet pressure | Mpa | 0.6 |
| 5 | Maximum particle size | mm | 1 |
| 6 | Weight | kg | 1.8 |
| 7 | Noise level | db | ＜68 |
| 8 | Max dry suction | m | 4.2 |
Pneumatic Diaphragm Pump Specifications
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP
Pneumatic Diaphragm Pump Application
1, Poisonous, combustible and volatilizable liquids.
2, Strong acid, strong alkali liquids with corrosion
3, Tanker truck, bilk plant, load and unload of oil products
4, Pickle, fruit pulp, mashed potatoes, chocolates, etc
5, Paint, rubber, pigment and adhesives
6, Various ceramic pulp, grouting, mortar and slurry
7, Various latex, organic solvents, stuffing
8, Stripping of oil carrier (pump dirty water and residual oil)
9, Common hop, thin paste of yeast power, syrup and molasses
10, Special liquid
A 06X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon
Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ···············································40°- 150°F
(4.4- 65.5°C)
Santoprene·········································-40°- 225°F
(-40°- 107.2°C)
·················································40°- 220°F (4.4°-
104°C)
Nitrile··················································10°- 180°F
(-12°- 82°C)
Viton····················································-40°-
350°F (-40°-176.6°C)
Hytrel····················································-20°-150°F
(-12°- 93°C)
Kynar····················································10°-200°F
(-28.9°- 65.5°C)
Polypropylene·········································32°- 175°F
(0-79.4°C)
