3V High Capacity Environmentally Friendly Battery 3 In 1 EC Reader
:
Use Method Of EC Reader :
1. Remove the cap. Press the “ON/OFF” key and place it in the test
solution,the depth at the water level of the meter.
2. When the value is stable after 1-5 seconds, press the "HOLD"
button to lock the value and take out the test meter and read the value.
Conductivity Test Method Of EC Reader :
This meter initially displays PPM value when power-on, PPM is the
unit of TDS value. When you need to detect the conductivity, press "SHIFT" button so that
it can switch to EC test function.
Temperature Usage :
When the power is turned on, the displayof temperature is with the
unit of [°C]. [°C] is the common temperature unit in China. If you want to detect the
temperature with Fahrenheit. Press the "Shift" button to switch to [°F].
Why Choose Us?
We are manufacturer. The source of product, to ensure a most
favorable price. There is no middleman to make a difference, the
supply is sufficient, no need to worry about out of stock, reduce
the troubles of re-selecting the supplier again.
The materials used in our factory are all excellent ABS
materials,refuse fake and inferior products. We can serve you from
factory to end sales.
Detailed Description :
Our button is hot-press laser welding technology, the button is
directly welded to the circuit
board, more stable and durable, withstand hundreds of thousands of
presses, rebound
damping is more comfortable, qualitiable.Some cheap EC&TDS
meters on the market use
plastic brackets,the position is easily offset, resulting in poor
button contact,not displaying
content when you press it, and the plastic material is
unstable,will cause the entire button
function out of order.
Technical Parameters Of EC Reader :
| Conductivity | 0-9990us/cm |
| TDS | 0-9999 ppm |
| Degrees Celsius | 0.1-80.0 ° C |
| Fahrenheit | 32.0-176.0 ° F |
| Accuracy | ± 2% |
| Weight | 55g |
| Dimension | 154 x 30 x 14 (mm) |
