Soda Water PET Bottle Blow Molding Machine Aluminum Bottle Mould
Description & features
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
4). High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which
could adjust the temperature of the infrared lights in the
pre-heater, and keep the proper temperature and humidity
invariable.
5). High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and
noise.
7). Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
Parameter
| Main part: |
| Pneumatic part | Valve | SMC |
| Cylinder |
| Electric part | PLC | LG |
| Operating system | LG |
| Relay | OMRON |
| Infrared thermometer | America raytek |
| Note | All of the electrical components adopts CE,UL,CCC approved
international advanced high-tech product. |
| Main parameter: |
| Productivity | Depend on bottle design | 5800-6000PCS/H |
| Product type | Body diameter | 20mm-100mm |
| Height | 50mm-350mm |
| Neck diameter | 15mm-38mm |
| Mold | Cavity | 6cavities |
| Mold thick | 240mm |
| Mold | 500*500mm |
| Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
| Rated Power | 49kw |
| Really use power | 14kw |
| Size | L*W*H | 1900*1860*1930mm |
| Weight | 3600kg |
| Auxiliary equipment(preform unscrambler) | L*W*H | 2000*950*2480mm |
| Weight | 250kg |
| Resin available | | PET |
Machine list
| Item | Machine description | Model | Size | Power | Qty. |
| mm | kw |
| 1 | Blow Molding Machine | ZG-6 | 2808*1958*1920 | 70kw | 1 set |
| Preform unscramble | 2000*950*2480 | 1 set |
| 2 | HP Air Compressor | 4.8 m3/ min 30Kg | 2020*1570*2000 | 33kw | 1 set |
| 3 | LP Air Compressor | 2.0 m3/min 10Kg | 2000*1050*1900 | 15kw | 1 set |
| 4 | High pressure Air dryer | 3.0 m3/min 30Kg | 1050*650*1100 | 5kw | 1 set |
| 5 | Air Filters | 2.0 m3/min 30Kg | 750*350*350 | / | 3sets |
| 6 | Low pressure Air dryer | 2.0m3/min 15Kg | 1050*650*1100 | 3kw | 1 set |
| 7 | Air Filters | 2.0 m3/min 30Kg | 750*350*350 | / | 3sets |
| 8 | Air Tank | 1.0 m3/min 30Kg | 1200*1100*1650 | / | 1 set |
| 9 | Air tank | 1.0 m3/min 15Kg | 1200*1100*1650 | / | 1 set |
| 10 | Mould Chiller | 8HP | 850*560*870 | 5kw | 1 set |
| 11 | Bottle mould | 500ml | 6 cavity
7050 aluminum mould | / | 1 set |
Auxiliary machines
HP air compressor
| Air compressor | Unit | 2.4M3/30KG * 2sets |
| Volume | M3 | 2.4 |
| Pressure | Kg | 30 |
| Power | KW | 11 |
| Overall Dimension | mm | 2020*1570*2000 |
| Weight | kg | 2400 |
LP air compressor
| Air compressor | Unit | 1.6M3/10KG |
| Volume | M3 | 1.6 |
| Pressure | Kg | 10 |
| Power | KW | 12 |
| Overall Dimension | mm | 1700*760*1440mm |
| Weight | kg | 400 |
Air Cooling Drier
| Refrigeration Air Dryer | Unit | 2.0M3/3.0Mpa |
| Flow capacity | Nm3/min | 2.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | ℃ | ≤80 |
| Dew point | ℃ | 23 |
| Ambient Temp. | ℃ | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | | R22 |
| Overall Dimension | mm | 1050*650*1100 |
| Weight | Kg | 120 |
Air Filter
| Refining-Filter | Unit | 2.0M3/30Kg |
| Flow Capacity | M3/Min | 2 |
| Max. work pressure | Mpa | 3.0 |
| Inlet Temp. | ℃ | ≤50 |
| Weight | Kg | 20 |
| Overall Dimension | mm | 750*350*350 |
Air Storage Tank
| Air storage tank | Unit | 0.6M3/3.0Mpa |
| Volume | M3 | 0.6 |
| Pressure designed | Mpa | 3.0 |
| Temp. designed | ℃ | 100 |
| Work pressure | Mpa | 3.0 |
| Test pressure | Mpa | 4.13 |
| Weight | Kg | 400 |
| Overall Dimension | mm | 1200*1100*1650 |
Mould Chiller
| Model | 03WCI |
| 4.4/38℃ Cooling capacity(Kcal/h) | 75800 |
| Compressor | All-closed vorticity |
| Compressor power (KW) | 2.5 |
| Refrigerant | R22 |
| Chilled water pump power(KW) | 0.75 |
| 10℃ Max. flow rate of chilled water(L/min) | 55 |
| Flow water inlet and outlet pipe | 1’’ |
| Condensing water rate L/min | ≥36 |
| Chilled water inlet and outlet pipe | 1’’ |
| Exterior dimension | Length(mm) | 1100 |
| Width(mm) | 650 |
| Height(mm) | 1100 |
| Water tank capacity | L | 38 |
| Weight | Kg | 180 |
Contact us
Contact person: Vickie Sun
MOB (whatsapp / wechat): 0086 13584426100
Email: sunpiu2012@gmail.com
Skype: vickiesunqiu
More photos for ref
