Bottle Screw Inlet Juice Hot Filling Machine 1L Glass Bottling
Equipment
Quick detail
| Project name | Juice filling machine |
| Machine structure | 3 in 1 washing filling capping machine |
| Bottle type | Glass bottle |
| Cap type | Aluminum screw cap (short cap) |
| Juice type | Fresh juice / concentrate juice |
| Juice temperature | Hot temperature |
Description
1). The raw water will be purified and sterilized after passing
through the water treatment system, and will be stored in the
purified water storage tank;
2). The juice will be prepared by the juice preparation system, the
prepared juice is stored in the insulation tank (for heat
preservation) temporarily;
3). Automatic heat resistance PET bottle blow molding machine is
connected with the water filling machine by the Air conveyor;
4). Prepared juice will be pumped into the juice filling machine;
At the same time, empty bottles pass through the rinsing, filling
and capping 3-in-1 monoblock, the bottles will be rinsed, filled
and capped.
5). Bottled water goes out from the water filling machine and will
be transferred to the bottle over-turn sterilizing machine, the cap
and the bottle mouth will be sterilized after passing through the
sterilizing machine, then the bottles will be transferred to the
bottle cooling machine;
6). The bottles are getting dried after passing through the blowing
dryer, and the dried bottle will go to the labeling machine and PE
film shrink wrapping machine;
7). The packed bottle water will come out from the PE film shrink
wrapping machine.
Auxiliary machines
1, Vacuum pump
2, Cap elevator
3, Cap sorter
4, Central lubrication system
Parameters
| Model | FCGF12-12-5 | FCGF18-18-6 | FCGF24-24-8 | FCGF32-32-10 |
| Production B/H(330ml) | 3000 | 5000 | 7000 | 12000 |
| Water pressure of washing bottle | 0.18-0.25Mpa |
| Water consumption for washing bottle (kg/h) | 1300 | 2000 | 3000 | 4000 |
| Spraying position | 4 | 7 | 10 | 14 |
| Dripping bottle position | 3 | 5 | 8 | 10 |
| Filing precision | +5MM |
| Gas source pressure | 0.4Mpa |
| Gas consumption(m³/min) | 0.3 | 0.4 | 0.5 | 0.7 |
| Total power(KW) | 4.2 | 4.5 | 5 | 6.2 |
| Total weight (T) | 2 | 2.5 | 3 | 4 |
| Dimension (L*W*H)mm | 2100*1600*2100 | 2500*1750*2100 | 2700*2100*2100 | 3500*2100*2100 |
Special tips
1, Bottle washing: suggest to adopt two steps hot water washing
process because need to warm up the glass bottle in advance to
avoid explode;
2, Bottle feeding: must using screw bottle inlet;
3, Central lubrication: it will help to lubricate the machine
easier;
4, Need air purifier for the filling machine while filling;
We have more suggestions, pls contact us for more professional
comments basing on your project.
Contact person: Vickie Sun
MOB (whatsapp / wechat): 0086 13584426100
Email: sunpiu2012@gmail.com
Skype: vickiesunqiu
Configurations
| Name | Brand | Origin |
| Transducer | Siemens | Germany |
| Touch screen | Siemens | Germany |
| PLC | Siemens | Germany |
| Stabilized voltage supply | Schneider | France |
| Contactor | Schneider | France |
| Approach switch | Schneider | France |
| Air switch | Schneider | France |
| Light sensor | Autonics | Korea |
| Motor | ABB | Swiss |
FAQ
If you have any special requirements for your products filling
packing, please feel free to contact us, most of our machines are
custom-made according to your requirements.
For more information of our company and machines, please don't
hesitate to contact us. We'll give you reply as soon as we got your
inquiry.
More photos
