Automatic Carton Corrugated Box Printing Machine Multi Colors Box
Making Machine
Feeder paper department
The machine clutch:
1) the machine clutch electric control with alarm, moving last
warning bell ring, Ensure workers safety.
2) Pneumatic interlocking device
3) the main motor adopts frequency conversion motor, frequency
conversion controller, energy saving, stable starting, attached to
the motor start protection device.
2. Lead Feeder paper system
1) the suction assist feeder paper,draught fan 7.5 kw, at different
levels can be bent according to the board, air volume adjustment,
ensure feeding smoothly.
2) Carry paper,fall paper adopt cylinder push, move quick and
powerful.
3)Side panel for manual adjustment, front and back panel are manual
adjustment.(can options Electrical adjustment ).
4) Taiwan super resistance to lead feeding wheel, Perishable Wear
Resistant.
5)skip feeding paper device,( can choose according to need
continuous or skip feeder paper).
6)Feeding counter, set, display production quantity .
3.Dust removal device1) Paper brush dust removal device, can remove
impurity on printing cardboard the surface , improve the quality of
printing .
4. Feeder paper roller .
1) . Outer diameter: 140 mm, up roller .
2).45 # seamless steel tube, parcel wear-resisting rubber, and do
dynamic balance correction.
3)down roller,external diameter 140 mm, embossing and hard chromium
plating , and do dynamic balance
correction .
4)feeder Paper roller gap dial manual adjustment, adjustment range
0-12 mm .
5)The former feeder paper rubber roller (elastic rubber roller) for
dynamic lift and fall , automatic voltage regulator, can reduce the
strength fracture of the corrugated board
5. Computer device
1) The main motor adopts frequency conversion motor, frequency
converter adopt Delta from Taiwan, energy saving and save
electricity can reach 30%.
2) Fan adopts independent inverter control, wind pressure is
Adjustable .
3)Home screen adopt PLC control, human-machine interface.
4) printing department, die cutting department is equipped with
automatic zero device, (general carton using automatic zero device,
testing-run two pieces cardboard can be adjusted to the correct
position).
5)Automatic lift and down version of the device, printing anilox
roller in order to lift and down (computer delay), avoid printing
plate print ink for many times.
6) can join (memory Hang version, storage function of order).
(optional)
| Size | 2400mm(width) |
| Roller diameter | 400mm (roller) |
| Max feeder paper size | 1200x2200 |
Min feeder paper size | 280x650 |
| Max printing area | 1200x2000 |
| Design speed (pcs/min ) | 100 |
Economic speed ( pcs/min ) | 80 |
| Standard printing block thickness | 7mm |
| Main motor | 7.5kw |
| Air pump power | 7.5kw |
