High Speed Plastic Washing Recycling Machine For PP PE Milk Bottles
Plastic Washing Recycling Machine has two different washer, so PP
PE HDPE is one line, PET bottle washer plant is the other line.
Because the PP PE material is floating over the water, but the pet
material is under the water, According to this characteristic, they
need to separate.
Suit for these kind bottles recycle:
PP PE milk bottles washer, PP PE cola bottles washer, PP PE shampoo
bottle washer, PP PE oil barrel washer, PET drinking bottles
washer.
STPLAS MACHINERY new steam washer has a special design for
discharging the label and bottle cap which float on the water.This
new design improves the quality of the clean flakes.
Plastic Washing Recycling Machine Description:
-This pet flake hot washer machine is used for mixing waste HDPE
PET bottle scrap.
-The material will stay at hot washer for 8-10 minutes, and the hot
washer steamer feed with chemical (caustic Soda/NaOH/or other
detergent) , and the temperature should be keep 90-95℃.
-this system can be used Gas, electric and diesel to steam the hot
washer according the customer requirement.
-Rotor shaft inside hot washer is made by stainless steel.
Plastic Washing Recycling Machine Main technical parameter
| 1 | Main motor power | 7.5KW |
| 2 | Rotating Speed | 17r/min |
| 3 | Diameter of barrel | 1700mm |
| 4 | Depth | 2250mm |
| 5 | Volum of barrel | 4.5m3 |
Plastic Washing Recycling Machine shining points:
1. Our Machine raw material adopt stainless steel 304.
2. Our PET bottle crusher equiped with the force feeding pressing
device,
when the pet bottle us non - pressed, having this device will
effectively avoid the
bottle jump inside the chamber of the crusher, at the mean time,
this device can
enhance capacity to some degree.
3. High speed friction washer is new type. since the blade of the
friction washer is easy to get blunt, so the new type friction
washer blade can be dismantled and be changed.
4. Dewatering machine is also new type: the rotary speed can reach
to 2200rpm. While the old model can be 1200. the new type can dry
the pet flakes to 2% moisture content.
no need the air pipe dryer and blower, and at the same time,save
power for you.
FAQ:
Q: What’s the grade for PET Bottle Flake which is recycled by your
machine line?
A: Test report
Q: How often are the Crusher blades sharpened?
A: After continuous working at 30-40hours, the blades have to be
sharpened
Q: How about the rate for removing the labels by Label remover?
A: Compressed bottle: more than 95%
Un-compressed bottle: more than 98%
Q:What’s the temperature of steam washer ?
A: Usually 80-90℃ ( If the temperature is over 100℃, the Flake will
be roll.so the best temperature is 80-90℃)
Q: What’s the moisture after Horizontal dewatering machine?
A: About 1.8%.
Q: What’s the price of the complete machine line?
A: Depends on the capacity you need and also the device
If you want to know more information, welcome to contact us freely.
