12V microwave motion sensor super compact with dual processor
technology
Daylight Sensor with timer function and tri-level dimming for
HNP102
DC input, tri-level dimming control and for real built-in daylight
sensor
Quick Details:
1. 12 / 24V DC input
2. Dual daylight sensor to distinguish natural light & artificial
light
3. Really for built-in application
4. Tri-level dimming control
5. With timer embedded
6. 5 years warranty
Features:
| 1. | Super compact, flexible to be integrated into any suitable
fixtures. |
| 2. | Dual-processor technology, distinguish natural light and artificial
light(lamp) from behind the diffuser,
authentic daylight sensor for built-in application. |
| 3. | Tri-level dimming, not only for simple ON/OFF control, save more
energy. |
| 4. | Built-in timer, for end user to specify desired period to keep the
light 100% on before dim down. |
| 5. | 8 pin DIP switch seting, multiple options to meet different
customer demands. |
| 6. | RoHS compliant. |
Setting:
1. Daylight threshold
This is the threshold for the daylight sensor to switch on & off.
“Lux on”value means the daylight sensor will switch on when
detected natural light is less than it.
“Lux off”value means the daylight sensor will switch off when
detected natural light is more than it.
Note: Lux-on sampling time--10s; Lux-off sampling time--30s.
* when set as “Disable”, the daylight sensor will always be 100% on
in both day and night.
2. Timer period
This is the period for the lamp to keep 100% on when natural light
5 is below set threshold.
*when set as “Disable”, this daylight sensor will become a simple
on & off daylight sensor, switched
on 100% at insufficient natural light, switches off at enough
natural light.
3. Dimming level
After the timer period, if the natural light is still insufficient,
the lamp will drop to a pre-defined dimming
level. this dimmed level will sustain until the natural light
becomes enough and the daylight sensor switch
off totally.
*when set as 0%, means the daylight sensor will directly switch off
right after the timer period elapses regardless
of the natural light, even in the mid-night.
Note--Defaulted factory setings as below:
Daylight threshold = 10lux
Timer period = 4h
Dimming level = 10%
Typical applica
tion
Setings for below scenario: At 7:00AM, when natural light becomes
sufficient, the daylight sensor
automati-cally switch the fixture off.
