Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line

The servo feeder is an automatic device integrating digital, mechanical and pneumatic, and plays an important role in the high-end stamping industry.

The servo feeder is also a relatively sophisticated instrument. If it is used improperly or for a long time during use, it is easy to cause mechanical failure. The installation failures caused by the installation are mostly caused by external equipment failure.

Problem: The relaxation device does not smoothly cause an alarm;

Solution:
1. Check if the mold is internally defined as a guide pin, carefully check and correct.

2. Observe whether there is any deviation in the feeding direction, and then check if the working direction is correct and the mold is normal.

3. The eccentric shaft and the loose shaft are oil-dead, use kerosene and add butter.

Problem: Unstable feeding causes an alarm;

Solution:

1. check the mold for problems

2. Check whether the air pressure reaches 0.45kgf/cm3 under the condition that the feeder continuously presses normally;

3. Whether the delivery time is correct;

4. check whether the motor is normal (basic can rule out such cases);

Problem: The irregularity of the feeding causes the alarm;

Solution:

1. Check whether the pressure plate is evenly stressed. If it is uneven, adjust the pressure of the relaxation device.

2. Whether the feeding mechanism used is pneumatically relaxed, check whether the air compressor pressure is normal.

3. Check whether the coils fed into the material rack are on the same level as the feeder and mold.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.