Demountable Partition Walls Acoustic Partitions Exhibition Booth
Folding partitions wall
1: Moving wall surface without track, just install track on the
ceiling (or floor).
2: After the moving wall is stable, it is reliable and not easy to
swing, stable and safe
3: Mobile wall sound insulation effect is good, the maximum sound
insulation coefficient can reach 55db
4: Excellent insulation performance of mobile wall, according to
different seating rate, the large space is divided into small
space, in order to reduce the power consumption of air conditioning
5: Mobile wall beautiful and generous, arbitrary surface
decoration, and indoor unified decorative effect
| Series | BG 65 | BG 85 | BG100 |
| Panel supension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 400 mm | 600 mm | 800 mm |
| Panel width | 600-1230 mm | 600-1230 mm | 600-1230 mm |
| Face material | 9 mm | 9 mm | 9 mm |
| Pass doors | Single Door or Double Door |
| Sound insulation | 20 – 32 db | 28 – 36 db | 32 – 50 db |
| Finish Material | Plywood / MDF /Laminate / Melamine / Gypsum |
| Board / Fabric / Insulation / Fireproof /Wall Paper /Vinyl
/Painting /etc,(Customized) |
The production process of partition wallboard
1: The cut aluminum, double round pipe, double transmission rod and
other hardware parts assembled together, forming a basic frame of
the door, the frame is the foundation, the most important process
of the entire partition wall board
2: Soundproof cotton is filled in the door panel, so that the
partition wallboard has a more three-dimensional feeling, the sound
of knocking the door panel is smaller, while playing an effective
sound insulation effect
3: Each wallboard shall be packaged on the second floor, with
bubble film inside, effectively protecting the partition wallboard
and outsourcing paper to prevent it from being scraped. From the
production to the packaging of more than 100 to the working
procedure, each layer shall be checked to make every detail perfect
Installation site of partition wall
1: Installation track
Track is the base, is the priority among priorities of all links,
through percussion drilling expansion screws, welding Angle iron
and other steel materials fixed up.
2: Insert the door panel
The moving door panels are suspended in the rails without any
support on the ground.
3: Installation and debugging
Free and flexible, move the door panels according to whatever you
need to change the layout
4: Close against the wall
Convenient collection, save space
Partitions wall Hardware accessories
Frame, transmission rod, single wheel seat, multi-layer plate,
handle, sound insulation cotton, screw, track, Angle code, sealing
strip, aluminum, telescopic mechanism, lifting wheel, double wheel
seat
