high precision customized dimension white 95% purity zirconia
ceramic rod
Our ceramic products are mainly used in the industrial field of
precision ceramic structural parts, ceramic materials using
high-strength zirconia (yttrium stable/magnesium stable/cerium
Stable), alumina (97/99/99.5/99.7/99.9/99.99) material.
Production and sales of ceramic structural parts are widely used in
instrumentation, food medicine, solar photovoltaic, mechanical
hardware, laser semiconductors, petrochemical, automotive military,
aerospace and other high-end fields.
Mingrui ceramics have been concentrated in the field of ceramic
finishing for many years. We manufacture ceramic precision
components in the performance of a number of institutions and many
customers alike, ceramic precision components of the performance
are significantly better than the peer products.
Zirconia Parameter
| Item | Unit | zirconia |
| Density | g/cm3 | 6.05 |
| Water absorption | % | 0 |
| Coefficient of thermal expansion | 10-6 /k | 10.5 |
| Young's elastic modulus | Gpa | 210 |
| Poisson-Pine ratio | / | 0.3 |
| Hardness (HV) | MPa | 1200 |
| Bending strength (room temperature) | MPa | 950 |
| Bending Strength (700 ℃) | MPa | 210 |
| Compressive strength (room temperature) | MPa | 2000 |
| Fracture toughness | Mpa.m1/2 | 10 |
| Thermal conductivity (room temperature) | W/m.k | 2 |
| Specific resistivity (room temperature) | Ω.mm2/m | ＞1015 |
| Maximum usage temperature | ℃ | 750 |
| Corrosion resistance of acid and alkali resistance | / | strength |
Products showing
Zirconia ceramics are formed by dry pressing, isostatic pressing,
injection molding, hot die casting molding, hydroforming, injection
molding, plastic extrusion molding, colloidal solidification
molding, etc.The most widely used is injection molding and dry
pressing molding, and the highest density of products is isostatic
pressure molding.
About us
Related products
Ceramic Service Guarantee
customize all kinds of non-standard ceramic structural parts and
special-purpose ceramic parts according to customer use
environment, drawing requirements and material performance!
Main material includes: alumina ceramics, zirconia ceramics
Size accuracy: up to 0.003;
Finish: up to Ra0.03;
Concentricity: up to 0.003;
Parallelism: up to 0.002
Inner hole: minimum processing ￠0.12 x 3 mm;
Straight groove: the narrowest machinable groove width is 0.1x100mm;
Thickness size: minimum machinable to 0.02mm;
Threads: minimum machinable internal threads M2, no limit on external
threads.
Also available to provide a variety of ceramic precision parts
customization and raw materials wholesale!
Certification for reference
Welcome to visit us in our factory and send us your drawing for
quotation
