1. Main characteristics
lIndustrial design, adjust to high temperature and other bad
environments;
lSimulated manpower friction card issuers better adaptability to
various deformed cards;
lWatchdog of hardware and embedded operating system to ensure
properly running;
lPre-dispense function accelerate dispensing speed;
lConnectable with the vehicle detector to achieve card issuing and
one car, one card”;
lAutomatic buzzer alarm when no cards, fewer cards or failure.
lProvide both RS232 and I/O voltage control interface;
lAutomatic buzzer alarm when errors occur, automatic reset after
100 seconds alarm;
lCapacity of card stacker is more than 40pcs, automatic buzzer
alarm when the withdrawing stacker is full;
lSlide card stacker with a capacity of 40pc;
lAdjustable of card stacker with a capacity of 120pc each;
lAutomatic withdrawal to prevent card lost (only for TCD800F series
lSlide design to make installation and disassembling easier;
lMolded production to ensure high consistency of precision and
quality.
2. Main technical data
lOperating voltage: 24VDC (max current 2A, static current 0.1A)
lOperating temperature: -20℃ to 85℃
lOperating humidity: 30-90% (comparatively)
lUse condition: install in bin
lCard available: width: 54+/-0.5mm
Length: 85+/-0.5mm
lThickness: 0.3-2.5mm (adjustable)
lCard material: Paper or Polyester card
lNet weight of card dispenser: 2.0kg (including the briquette)
lTime of issuing: max0.5s
lCapacity of stacker: 150pcs (0.8mm), 100pcs available when an
extra stacker is needed
