Feature of Fertilizer Granulator Machine
1.The granulating rate can be reached more than 93%.
2.The design of granulator which greatly reduce the labor intensity
and improves labor efficiency.
3.The disc is sturdy,durable,anti-corrosion,has long life and
requires very less maintenance.
4.Easy operation and maintenance.
5.Long service life.
6.Quick profit,good economic returns
Specification of Fertilizer Granulator Machine
| Model | Inner diam | Side height | Volum | Motor power | Capacity |
| (mm) | (mm) | (m³) | (kw) | (t/h) |
| ZL10 | 1000 | 250 | 0.4 | 2.2 | 0.3-0.5 |
| ZL15 | 1500 | 300 | 1.1 | 5.5 | 0.5-0.8 |
| ZL18 | 1800 | 300 | 1.4 | 5.5 | 0.6-1.0 |
| ZL20 | 2000 | 350 | 1.8 | 7.5 | 0.8-1.2 |
| ZL25 | 2500 | 350 | 2.5 | 7.5 | 1.0-1.5 |
| ZL28 | 2800 | 400 | 3.3 | 11 | 1.0-2.5 |
| ZL30 | 3000 | 450 | 3.9 | 11 | 2.0-3.0 |
Introduction of Fertilizer Granulator Machine
A high quality disc pelletizer is an ideal solution when creating a
uniform pellet from dry or slightly moist materials. Also known as
pan granulators or pan pelletizers, their heavy-duty structure and
easy control capabilities offer reliability and operational
flexibility. So it means that disc granulator is good at both NPK
and organic fertilizer.A high quality disc pelletizer is an ideal
solution when creating a uniform pellet from dry or slightly moist
materials. Also known as pan granulators or pan pelletizers, their
heavy-duty structure and easy control capabilities offer
reliability and operational flexibility. So it means that disc
granulator is good at both NPK and organic fertilizer.
The structure of Fertilizer Granulator Machine
The following components are standard disc pelletizer mechanisms:
Base- The base is fabricated using structural members and heavy
welded plates. It provides a solid foundational structure
pelletizers.
Disc- The disc, also referred to as the pan, is constructed of
heavy-duty carbon steel plates. The plates are welded and
reinforced to strengthen the overall structure. Included in the
disc system is a hand-wheel operated jacking screw. This device
easily adjusts the disc’s horizontal angle .
Drive Unit- The drive unit is comprised of automated mechanisms
such as the motor, parallel or concentric shaft reducer, and V-belt
drive. Both the motor and the reducer are mounted on a bracket
behind the disc. The disc is then mounted to the reducer’s output
shaft.
Plow / Scraper- Plows and scrapers are independently mounted
vane-type components that control the material layer as it tumbles
over the surface of the disc. The scrapers of larger diameter discs
are covered with a ceramic, wear resistant coating/facing that
protects the scraper from abrasive materials.
Plow Support- The plow support is constructed of heavy, welded,
structural members. It is fabricated to provide rigidity to the
disc support system and permit quick adjustments to the disc angle
without requiring a separate plow adjustment.
