| 01 | 3 main ports | 3 |
| 4 main ports | 4 |
| 02 | Directional valve | WE |
| 03 | Size 6 | 6 |
| 04 | Symbols e. g. C, E, EA, EB, etc.; for the possible version, see Symbols | |
| 05 | Component series 60 … 69 (60 … 69: unchanged installation and connection dimensions) | 6X |
| 06 | With spring return | no code |
| Without spring return | O |
| Without spring return with detent | OF |
| 07 | High-power solenoid, wet-pin, with detachable coil | E |
| 08 | Direct voltage 24 V | G24 |
| Alternating voltage 230 V, 50/60 Hz | W230 |
| AC voltage 110 V or 120 V, 50/60 Hz | W110
W + voltage |
| Direct voltage 205 V | G205 |
| DC solenoid with rectifier for AC voltage (not frequency-related; only available with plug-in connection with cover, see central connection dimensions) | W110R |
| Nominal voltage 96 V at DC solenoid in case of operation with AC voltage mains (AC voltage mains 110 V - 50/60 Hz with an admissible voltage tolerance of +/- 10 %) | G96 |
| Nominal voltage 205 V at DC solenoid with operation with AC voltage mains (AC voltage mains 230 V – 50/60 Hz with an admissible voltage tolerance of +/- 10 %) | G205 |
| Connection to AC voltage mains via control with rectifier 1) |
| 09 | Without manual override | no code |
| With concealed manual override (standard) | N9 2) |
| With manual override | N 2) |
| With lockable manual override "mushroom button" (small) | N4 2) |
| With lockable manual override "mushroom button" (large) | N5 2); 3) |
| With manual override "mushroom button" (large), not lockable | N6 2) |
| With lockable manual override "nut" | N7 2) |
| Electrical connection |
| 10 | Individual connection |
| Without mating connector, with connector DIN EN 175301-803 | K4 4) |
| Without mating connector, with connector AMP Junior-Timer | C44) |
| Without mating connector, with connector DT 04 - 2PA (Deutsch plug) | K404); 7) |
| Without mating connector, 4-pole with connector M12 x 1 according to IEC 60947-5-2, integrated interference protection circuit and status LED | K72L5) |
| Without mating connector, 4-pole with connector M12 x 1 according to IEC 60947-5-2, integrated interference protection circuit and status LED (no connection pin 1 to pin 2) | K73L5) |
| Central connection |
| Cable entry at the cover, with indiSAARor light | DL |
| Central plug-in connection at the cover, with indiSAARor light (without mating connector); connector according to DIN EN 175201-804 | DK6L6) |
| With M12x1 plug-in connection, high-performance version: 4-pole | DK24L 5) |
| With M12x1 plug-in connection, high-performance version: 4-pole, integrated interference protection circuit, operating display with LED | DK35L 5) |
| Spool position monitoring | | |
| 11 | Without position switch | no code |
| Inductive position switch type QM |
| Monitored spool position “a” | QMAG24 |
| Monitored spool position “b” | QMBG24 |
| Monitored rest position | QM0G24 |
| Inductive position switch type QR |
| Monitored rest position | QR0G24S |
| Monitored spool position "a" and "b" | QRABG24E |
| Inductive position switch type QL |
| Monitored spool position “a” | QLAG24 |
| Monitored spool position “b” | QLBG24 |
| Inductive proximity sensor type QS |
| Monitored spool position “a” | QSAG24W |
| Monitored spool position “b” | QSBG24W |
| Monitored spool position "0" | QS0G24W |
| Monitored spool position "0" and "a" | QS0AG24W |
| Monitored spool position "0" and "b" | QS0BG24W |
| Monitored spool position "a" and "b" | QSABG24W |
| For further details, see data sheet 24830 |
| 12 | Without throttle insert | no code |
| With throttle insert |
| Connection | Throttle Ø in mm |
| 0,8 mm | 1,0 mm | 1,2 mm |
| P | = B08 | = B10 | = B12 |
| A | = H08 | = H10 | = H12 |
| B | = R08 | = R10 | = R12 |
| A and B | = N08 | = N10 | = N12 |
| T | = X08 | = X10 | = X12 |
| Use with flows which exceed the performance limit of the valve (see Product description) |
| Clamping length |
| 13 | 42 mm (standard) | no code |
| 22 mm | Z |
| Seal material |
| 14 | NBR seals | no code |
| FKM seals | V |
| Observe compatibility of seals with hydraulic fluid used. (Other seals upon request) |
| 15 | Without loSAARing hole | no code |
| With loSAARing hole | /60 8) |
| With loSAARing hole and locking pin ISO 8752-3x8-St | /62 |
| 16 | Further details in the plain text | * |
