Hazardous Waste Separation Screw Decanter Centrifuge 450mm Fully Automatic Control

450mm Screw Bowl Hazardous Waste Separation Treatment Decanter Centrifuge

Centrifuge Applications
Solid-liquid separation realized by using a high-efficiency LW series two-phase centrifuge can reduce the liquid content of the slag phase, facilitate transportation, and increase the combustion heat value.

Separation performance:

The water content of the slag phase after centrifugation can be ≤55, and its total volume is reduced by over 80% compared to that before separation;

The solid content of the liquid phase after separation can reach ≤0.1~0.2%

Solid-Liquid Separation Of Hazardous Waste Disposal Systems

Hazardous wastes refer to the wastes with hazardous characteristics that are listed in the National Hazardous Waste List according to the Law of the People's Republic of China on the Prevention and Control of Environment Pollution Caused by Solid Wastes, or dangerous wastes determined using the state prescribed standards and methods for identification of hazardous wastes.

With the development of industry, the amount of hazardous wastes discharged from industrial production is increasing. It is estimated that the annual amount of hazardous wastes generated worldwide is 330 million tons. Due to the serious pollution and potential grave impacts of hazardous wastes, the hazardous wastes in industrially advanced countries have been called “political wastes”. The public is sensitive to hazardous wastes and opposes the establishment of hazardous waste disposal sites in their living areas. The disposal of hazardous wastes is expensive, and some companies are trying to transfer hazardous wastes to industrially underdeveloped countries and regions.

Hazardous waste treatment process

Gasification melting process is adopted. The system comprises feeding and preparing device + gasifier + secondary combustion chamber + residual heat exchanger (SNCR) + chiller + bag dust remover + alkali eluting sulfur tower + wet electrostatic precipitator + flue gas heat exchanger +flue gas burner+low temperature SCR + induced draft fan + chimney. The treated flue gas is discharged into the atmosphere through the chimney to ensure that the concentration and discharging rate of gases polluting the environment are lower than the standard emission requirements.

The working principle is that the hazardous waste enters the gasification furnace after pretreatment, and is subjected to pyrolysis and gasification under an anoxic reducing condition. After that, the gasified product enters the melting furnace for high-temperature combustion to generate glassy slag. Compared with conventional incineration, the gasification and melting technology is completely harmless and remarkable in capacity reduction, and recovers energy and by-products.

Core equipment of gasification slag dewatering – centrifuge

★ Fully automatic control mode

Programmatic automatic control mode from start to separation to cleaning to stop reduces human intervention during the operation of the equipment and lowers the requirements on operator quality; the intelligent control mode together with sensors for measuring vibration and temperature and speed has improved the capability to predict and solve equipment operation failures.

★ Double-motor double-frequency conversion common DC bus

The main and ancillary motors of the centrifuge are controlled by a high-performance vector inverter. The ancillary motor is always in the generator state under the differential speed. The inverter adopts common DC bus technology. The auxiliary inverter can convert the electric energy generated by the ancillary motor into the power source to drive the main motor, thereby achieving the purpose of energy conservation.

Through the double-motor double-frequency conversion control technology, the stepless adjustment of the centrifuge differential speed can be realized. It features fast reaction speed, accurate torque detection, stable torque control, and low failure rate.

IV. Two-phase centrifuge model and technical parameters

Note: The throughput is related to material characteristics;

Applications projects:

         Chengdu ZK Separation Technology Co., Ltd. is a specialized solid-liquid separation equipment company established by Chengdu West Petroleum Equipment Co., Ltd. according to the development needs. Relying on the technical experience of long-term infiltration and accumulation in many fields including petroleum, chemical engineering, tunnel engineering, sewage treatment, mining equipment, etc., we have developed the high-efficiency sewage concentration and dehydration treatment series centrifuge, alcohol production line alcohol stillage treatment series centrifuge, crude oil and kitchen waste harmless and resource-oriented treatment series three-phase centrifuge, medical extract treatment three-phase centrifuge, SOR three-phase sludge separation system, TDU waste sludge thermal desorption treatment system and other multi-field products and their complete sets of technology, and possess a number of inventions, utility models and appearance patents.

      ZK Separation always attaches much importance to the cultivation of talents in the chemical engineering and water treatment industries, and connects the frontier technologies such as mechanical analysis, materials science, fluid mechanics, aerodynamics, vibration isolation technology, automatic control technology, and sensor technology with the centrifuge industry. We have the teams of product R&D and manufacturing process engineers who have been working in the key enterprises of separation machinery industry for many years. On the basis of absorbing domestic and foreign advanced technology, and combined with the special features of production technology in various domestic application industries, we pay much attention to the industrial segmentation. We specialize in the design of petroleum, chemical engineering, coal chemical industry, steel, food, resin, fermentation, medicine, excess sludge of water supply and drainage, etc., completing the R&D, manufacturing and sales of dozens of products and auxiliary equipment including the solid-liquid two-phase, liquid-liquid-solid, solid-liquid-solid three-phase with different parameters explosion-proof centrifuge with flammable and explosive liquids as medium and the online real-time centrifuge with adjustable liquid layer. We have various unique techniques such as high-efficiency sewage concentration, dehydration treatment, three-phase separation of crude oil, kitchen waste, sludge and medical extract, wear-resistant energy-saving, explosion-proof sealing and interlock control. Our centrifuge has distinctive advantages including small covering area, simple process pipeline; high degree of automation; high safety protection measures; good on-site operating environment; strong material adaptability; and stable and reliable operation.

        Our Company has research facilities and testing benches with complete performance and intact data collection, and the professional production equipment and testing instruments ensure the high-volume, high-quality manufacturing capabilities.

      Over the years, our Company has been focusing on the acquisition of advanced equipment and the development of new technology. We have purchased advanced machining equipment from Germany, the United States, Japan and other countries. At present, we own more than 200 various modern processing equipment including processing centers of each link, CNC gantry milling, laser cutting machine, large-scale lathe, boring mill, high-precision grinding machine, plate shearing machine, bending machine, sand blasting and painting equipment, etc.