White Color Emulsion Bonded Epoxy Fiberglass Chopped Strand Mat For
Pultruded Sections
Product Description
Fiberglass chopped strand mat is a non-woven E-or C-glassfiber mat,
product manufactured by spreading continuous filament roving of
50mm in length randomly and uniformly in combination with polyester
binder in powder form (or other binder in emulsion form). This
product is characterized by good combination of resin, easy
operation, good wet strength retention, good laminate transparency
and low cost.
Fiberglass chopped strand mat is made of chopped strands in 50mm
length, with powder binder or emulsion binder. It is compatible
with unsaturated polyester, vinyl ester, epoxy and phenolic resins.
The products are most widely used in hand lay-up process and can
also be used in filament winding, compression molding and
continuous laminating processes. The typical end-use applications
include various panels, Tank, boats, FRP roofing sheet, Auto roof,
bathroom equipment and cooling towers etc.
Product Specification
Area weight: 100g/m2, 150g/m2, 180g/m2, 200g/m2, 225g/m2, 300g/m2,
325g/m2, 375g/m2, 450g/m2, 600g/m2, 800g/m2
Width: 1.04m, 1.25m, 1.32m, 2.5m, 3m, 3.3m, etc.
Roll weight: 30kg,35kg, 45kg, 80kg, etc.
E,C Specification | Weight g/m | Breaking strength N/150mm | Speed of impregnations | Package Weight (kg) |
| E-MC100 | 100 | 30 | 60 | 20 |
| E-MC200 | 200 | 30 | 180 | 30 |
| E-MC350 | 300 | 43 | 180 | 30 |
| E-MC450 | 450 | 60 | 180 | 30 |
| E-MC600 | 600 | 80 | 180 | 30 |
Product Features
1. Good wet-out, Easy to form, easy roll-out and air release.
2. Even thickness, low fuzz.
3. Good resistance to watering and chemical agents in
anti-corrosion applications.
4. Very high tensile strength, suitable for filament winding or
continuous laminating.
5. Smooth laminate surface, good laminate transparency.
Product Applications
It is suitable for the applications by hand lay-up FRP moldings,
such as: various sheets and panels, boat hulls, bath tubs, cooling
towers, corrosion resistant, vehicles etc.
