1.Optimized clamping unit provides lower energy consumption and
faster movements for reduced cycle times.
2.The redesigned toggle kinematics for higher efficiency and lower
energy consumption for small and large machines.
3.The redesigned clamping unit providing lower platen stress and
higher mold force stability, reducing mold wear and improving
molded product stability.
4.Fixed platen with centralized force loading and less platen
flexing. Redesigned moving platen providing centralized force
distribution from the toggle system to the mold. The result: higher
rigidity and stability.
5.Providing better lubrication and lower lubrication consumption. A
smooth operation leads to longer lifetime of the clamp. Less
maintenance required.
6.Due to new toggle design with optimized kinematics.
Take 200-ton clamping unit for example
Vm: Moving speed of movable platen
Vo: Moving speed of oil cylinder
7.The rigid one-piece injection base supports the common slide rail
for injection and screw movements.
8.Highly optimized servo-hydraulic technology, with improved
efficiency for lower energy consumption.
9.The technologically matured Jupiter II Series convinces not only
with rapid, smooth mold movements and its highly economical energy
consumption. The latest upgrade to the Jupiter - called “Plus” -
has brought significant additional improvements.
10.FOUR SHORT STROKE MOLD BREAK CYLINDERS
For accurate mold height control with closed loop position
feedback, ensures the mold is clamped with parallel movement.
11.HIGHLY RIGID INJECTION UNIT GUIDANCE
with independent movement of the screw drive support.
12.The Hydraulic Units
High efficiency, Energy-saving and high precise proportional
pressure and flow variable displacement pump system make the out of
the hydraulic system matching the required power for entire machine
operation without loss of high pressure throttle and overflow
energy. As comparedwith constant displacement pump, it saves power
by 30%~60%. A motor with same power may be fitted with an oil pump
of bigger displacement and thus accelerates the speed of
machine.Besides, the low oil temperature will prolong the service
life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to
ensure steady mold opening and clamping operation without any
impact.Besides, differential mold clamping operation is fitted to
ensure high production efficiency.
13.The Machine Introduction
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
14.Some of the important features:
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory
system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard
are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation
properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts
abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.
Aftersales service: Professional & timely.
| SPECIFICATION | HJF-140 |
| A | B | C |
| Screw Diameter | Mm | 38 | 42 | 45 |
| Screw L/D Ration | L/D | 22.1 | 21.6 | 19.5 |
| Shot Size(Theoretical) | cm3 | 193 | 227 | 278 |
| Injection Weight(PS) | g | 176 | 206 | 252 |
| Injection Rate | g/s | 94 | 105 | 135 |
| Injection Pressure | MPa | 205 | 159 | 140 |
| Screw Speed | rpm | 0~220 |
| Clamp tonnage | KN | 1400 |
| Opening stroke | mm | 380 |
| Space Between Tie Bars | mm | 420*420 |
| Max.Mold Height | mm | 450 |
| Min.Mold Height | mm | 170 |
| Ejector Stroke | mm | 120 |
| Ejector Tonnage | KN | 33 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 13 |
| Heater power | KW | 7.2 |
| Machine Dimension(L*W*H) | M | 4.5*1.2*1.7 |
| Machine weight | T | 4.2 |
| Oil Tank Capacity | L | 230 |
12.The Hydraulic Units
High efficiency, Energy-saving and high precise proportional
pressure and flow variable displacement pump system make the out of
the hydraulic system matching the required power for entire machine
operation without loss of high pressure throttle and overflow
energy. As comparedwith constant displacement pump, it saves power
by 30%~60%. A motor with same power may be fitted with an oil pump
of bigger displacement and thus accelerates the speed of
machine.Besides, the low oil temperature will prolong the service
life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to
ensure steady mold opening and clamping operation without any
impact.Besides, differential mold clamping operation is fitted to
ensure high production efficiency.
13.The Machine Introduction
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
14.Some of the important features:
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory
system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard
are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation
properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts
abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.
Aftersales service: Professional & timely.
