plastic water bottle with handle injection molding machine for
making cap manufacturers for sale mould production line
The Machine Introduction
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
Some of the important features:
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory
system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard
are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation
properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts
abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.
Aftersales service: Professional & timely.
Characteristic
The machine use the high-performance servo dynamic control system,
the oil pump as the power source, having the characteristics as
follow: high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
High Energy saving
Under the ideal working state, Power consumption is 40% less than
that of variable displacement pump and 70% less than that of fixed
displacement pump, save the cost effectively.
High precision
Precise control of low pressure & low flow, repeating precision is
less than 0.5%. Weight error of the products is 0.4%~0.7%, with
semi-close loop system nearly.
Low noise
Different from ordinary fixed pump injection molding machine, servo
power-saving injection molding machine is working only when
necessary. And working noise is less than 70dB, will be much
quieter for your working area.
| SPECIFICATION | HJF-780 |
| A | B | C | D |
| Screw Diameter | Mm | 90 | 95 | 105 | 110 |
| Screw L/D Ration | L/D | 23.2 | 22 | 19.9 | 19 |
| Shot Size(Theoretical) | cm3 | 2924 | 3258 | 3981 | 4369 |
| Injection Weight(PS) | g | 2632 | 2933 | 3583 | 3932 |
| Injection Rate | g/s | 574 | 640 | 781 | 858 |
| Injection Pressure | MPa | 195 | 175 | 143 | 130 |
| Screw Speed | rpm | 115 |
| Clamp tonnage | KN | 7800 |
| Opening stroke | Mm | 950 |
| Space Between Tie Bars | mm | 980*950 |
| Max.Mold Height | mm | 960 |
| Min.Mold Height | mm | 400 |
| Ejector Stroke | mm | 280 |
| Ejector Tonnage | KN | 186 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 37+30 |
| Heater power | KW | 56.7 |
| Machine Dimension(L*W*H) | M | 11.43*2.40*3.14 |
| Machine weight | T | 37 |
| Oil Tank Capacity | L | 1500 |
