The small machine is integral and does not need to be disassembled
and assembled. When lifting, the adjusting mode should be adjusted
to the minimum die thickness.
The disassembly and assembly of the machine will be completed by
the large crew of the injection machine manufacturer.
If the machine moves again in the workshop and there is no crane,
the bottom of the machine needs to be padded with rolling wood.
Because the machine is heavy, it should be directed by a crane
worker with lifting experience. Attention should be paid to the
following items:
(1) Use powerful hoists and conveyors to lift machines (including
cranes, hoisting equipment, hooks, wire ropes, etc.).
(2) If any hanging wire rope is in contact with the machine, cloth
or wood blocks should be placed between the wire rope and the
machine to avoid damaging the machine parts, such as the pull rod
of the injection molding machine.
(3) Pay attention to the stability and level of the machine when it
is lifted.
(4) The wooden block pads or pads can not be removed until all the
unloading and handling of the machine have been completed.
