24VDC 5 way 1/8'' port 4V120-06 Pneumatic Air Solenoid Valves
Internal Piloted Action In Automatic Winding Machine
Two-position three-way solenoid valves are usually used with
single-acting pneumatic actuators. Two positions are controllable
at two positions: on-off, three-way ventilation is provided by
three channels. In general, one channel is connected to the air
source, and the other two are connected. One channel is connected
to the air inlet of the actuator, and one is connected to the
exhaust port of the actuator. The specific working principle can
refer to the working principle diagram of the single-acting
pneumatic actuator.
PRODUCT FEATURES:
- Sliding column structure, good sealing and quick response
- Double-headed two-position solenoid valve with memory function
- No lubrication required
- Excellent insulation material and high insulation
- The coil is made of copper to ensure normal operation
TECHNICAL DATA of 4V120-06 Pneumatic cylinder valves Internal piloted action:
| MODEL | 4V110-06 | 4V120-06 | 4V130C-06 | 4V130E-06 | 4V130P-06 |
| Position number | Two positions Five ways | Three positions Five ways |
| Maximum pressure resistance | 1200kpa |
| Operating temperature | -5-60℃ |
| Voltage range | -15%~10% |
| Energy consumption | AC:2.5 VA DC:2.5w |
| Protection rate | IP 65 |
| Wiring form | Connector type |
| Maximum working frequency | 300 cycles per minute |
MAIN DIMENSION of 1/8'' inch hole 5 way 4V120-06 Pneumatic air
electromagnetic valves:
Armature & Piston of 4V120-06 Pneumatic control solenoid valves
Class F Insulation:
APPLICATION of 220VAC/DC24V 4V120-06 double solenoid coils
pneumatic control valves:
Double-acting cylinder with 4V120 5/2 way pneumatic cylinder
solenoid valves:
The double-acting cylinder is a solenoid valve that requires a
two-position five-way. A pneumatic connector, PU tube is required
to connect these components. The solenoid valve has five threaded
holes, three on one side and two on the other. The larger one in
the middle of the three holes is the air intake hole. The air
intake hole is connected to the third joint and the two are the
exhaust holes. The exhaust hole only needs to be equipped with a
muffler. The other two holes on the other side are the working
holes, which are the two holes on the front and rear end caps of
the cylinder, so that they are basically assembled. Maintain the
continuous airflow, and adjust the pressure of 4-5MPA through the
pressure regulating valve to control the piston of the cylinder to
reciprocate by energizing and de-energizing the solenoid valve.
Pneumatic solenoid valve installation precautions:
1. According to the fluid chemistry, select the appropriate
pneumatic solenoid valve material, such as strong acid gas can not
use the pneumatic solenoid valve made of ordinary steel.
2. Check the interface sealing condition of the pipe before
installation to prevent the use of foreign matter in the pneumatic
solenoid valve.
3. Pay attention to the correctness of the wiring when wiring, and
prevent the pneumatic solenoid valve from being safely used due to
incorrect wiring or the wrong direction of the coil.
Two main reasons for 4V120 pneumatic solenoid valve coil to burn
out:
1) The coil temperature is too high.
2) The inside of the coil is filled with water.
The coil temperature is too high for several reasons:
1: The actual voltage fluctuation is too large, exceeding the rated
voltage range. The domestic paint hung wire generally has a voltage
deviation of 5%, and a good manufacturer can reach 10%.
2: The medium circulating in your solenoid valve may have
impurities, which may be stuck. The force of the electromagnetic
wire cannot open the solenoid valve, causing the electromagnetic
coil to work all the time. The coil is energized for a long time,
the temperature rises, and finally the word burns.
3: The starting power of the coil is not enough, so that the
solenoid valve is always open, the coil heats up for a long time,
the temperature rises, and finally the word burns.
4: Your PTC thermistor is broken, causing the solenoid valve not to
be properly controlled.
Welcome to your enquiry!
