Automatically Wood Chip Biomass Boiler / Coconut Shell Fuel Wood Pellets Boiler

New design Automatically Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler For Wood Factory

Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Characteristics

1. DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Suitable for combustion shaped biomass fuel, pure coal or dual fuel.

2. With a draft fan for mechanical ventilation

3. Equipped with scraper slag remover, or spiral slag discharge machine to achieve mechanical slagging

4. The control and monitoring instruments are complete, and the boiler operation is safe and reliable.

Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Datasheet:

Boiler model: DZL3-1.25-SC

Boiler capacity output :3ton/h,3000kg/hr,200HP

Boiler Pressure:1.25Mpa

Radiation heating area:11.2m2

Convection heating area:67.74m2

The heating area of the economizer:43.6m2

Effective grate area:4.41m2

Fuel consumption:546.32kg/h

Feed temperature:20℃

Exhaust temperature:142.87℃

Design efficiency:83.27%

Boiler water capacity:7.27

Water test pressure:1.65Mpa

The chimney:φ400X35000MM

Design of fuel: biomass, Coconut shell, wood chips

3 ton Boiler bulk transport weight:19.5tons

Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Competitive Advantage:

1. Drum layout from top to bottom is compact and uniform heating. The water wall design with a membrane wall. It will prevent boiler furnace heat loss effectively

2. Water cycle structure increases heated areas and improves the water cycle effects, especially improve the DZL 3 - 1.25 - SC Biomass Fired Steam Boiler thermal efficiency.

3. Two parts assemble on customer site finally, which short the installation work and low the installation costs.

4. Body adopts the dual-rear-drum vertical structure, full layout heating surface and high thermal efficiency.

5. Mechanization combustion, environmental protection and energy conservation.

6. Auxiliary equipment, controlled panel PLC with a high level

7. Body and base use two pieces to leave the factory, installed in a short period and low installation costs.

8. DZL 3 - 1.25 - SC Biomass Fired Steam Boiler evaporation capacity is 3000kg/h, design pressure is 1.25 to 2.5Mpa and thermal power is 7MW.

Yongxing Boiler Group Co., Ltd. is a group company specializing in research, development, manufacturing, sales and installation services for various boilers and various thermal energy machinery and equipment.

Yongxing Boiler occupies an area of 60,000m2, with fixed assets of 15 million dollars, and is used for more than 100 sets of large and medium-sized equipment for production. More than 60 sets of advanced equipment for product quality inspection, with 37 series. The boiler and pressure vessel contains 167 specifications and models.

With A-class boiler manufacturing license issued by the General Administration of Quality Supervision, Inspection and Quarantine

A1 and A2 pressure vessel manufacturing licenses

The first-class boiler installation and transformation license

The ISO9001 international quality system certification and so on.

Annual production capacity is over 2000 tons.

YONGXING boiler main product:

Coal fired steam boilers, oil/gas steam boiler,hot water boilers, Thermal oil heaters, hot air furnace, oil/gas burners,chain grate accessories, and other environmentally friendly boilers and pressure vessels .

All the equipment are strictly enforced by the state and Industry standard, reasonable product design, advanced production technology, technical content in the country's similar products in a leading position, with compact structure, low noise, high thermal efficiency, safe and reliable operation, high degree of automation, etc.

All environmental indicators are in line with the national class I regional environmental protection standards require excellent products recommended by the environmental protection department.

Our company holds A-class boiler manufacturing qualification, A1, A2 pressure vessel manufacturing qualification and mechanical and electrical equipment installation engineering professional contracting qualification, and passed the international ISO9001 2000 quality management system certification.

Our company strictly follows the ISO9001 international quality management system guarantee model, carries out quality management and quality inspection and control activities, and the product quality is stable. It was rated as “Contract-honoring and Promise-keeping Enterprise” by the Henan Provincial Administration of Industry and Commerce, “National Honest and Law-abiding Enterprise” by the Ministry of Agriculture, and was included in the member unit by the China Quality and Technical Supervision Association, and has obtained a number of patented technologies.

Company honor: